Storage

ATCA Storage

ATC600

ATCA Storage Blade with RAID and iSCSI

  • Internet Small Computer System Interface (iSCSI) and Network Attached Storage (NAS), could be Network File System (NFS) or Common Internet File System (CIFS)
  • Line rate iSCSI hardware off load engine at 40/10GbE (100G supported but not at the line rate)
  • Fully compliant with the IETF RFC3270 and RFC4171
  • RAID-on-Chip (ROC) dedicated I/O Processor off-loads the RAID stack
  • Redundant Array of Independent Disks (RAID) levels 0, 1, 5 and 6
  • RAID spans 10, 50 and 60
  • Battery pack option to prevent data loss
  • Utilizes VadaTech’s proven IPMI Management Controller
View product ATC600 Data Sheet

ATC605

ATCA Storage Blade with RAID and iSCSI

  • Internet Small Computer System Interface (iSCSI) and Network Attached Storage (NAS), could be Network FileSystem (NFS) or Common Internet File System (CIFS)
  • Line rate iSCSI hardware off load engine at 40/10GbE (100G supported but not at the line rate)
  • Fully compliant with the IETF RFC3270 and RFC4171
  • RAID-on-Chip (ROC) dedicated I/O Processor off-loads the RAID stack
  • Redundant Array of Independent Disks (RAID) levels 0, 1, 5 and 6
  • RAID spans 10, 50 and 60
  • Battery pack option to prevent data loss
  • Utilizes VadaTech’s proven IPMI Management Controller
View product ATC605 Data Sheet

ATCA Storage

( expand all )

ATC600

ATCA Storage Blade with RAID and iSCSI

ATC605

ATCA Storage Blade with RAID and iSCSI

ATCA RTM Storage

( close )

ART116

ATCA Rear I/O Transition Module

  • ATCA rear I/O Module for Blades
    • i.e. Sun Microsystems Netra Blade CP3260, CP3220, VadaTech ATC114, etc.
  • DVI-I interface (VGA and DVI-D)
  • Resolution @ 1920x1200
  • Dual on board 2.5” SAS/SATA Disk
  • Disks run as independent or as RAID 0 or 1
  • Two port USB 2.0 high speed (480Mbit/s)
  • Front Blade Dual GbE to RJ-45
  • Front Management RS-232 to RJ-45
  • IPMI 2.0 Man
View product ART116 Data Sheet

ART115

ATCA Rear I/O Transition Module

  • ATCA rear I/O Module for Blades
    • i.e. Sun Microsystems Netra Blade CP3260,CP3220, VadaTech ATC114, etc.
  • Dual DVI/VGA interface
  • Resolution @ 1920x1200
  • Dual 10GbE SFP+
  • Removable on board 2.5” SAS/SATA Disk
  • Two port USB 2.0 high speed (480Mbit/s)
  • Front Blade Dual GbE to RJ-45 or LC Fiber(option for SX or LX)
  • Front Blade Management RS-232 to RJ-45
  • Dual RS-232 for the host blade
  • IPMI 2.0 Management Controller
  • RoHS compliant
View product ART115 Data Sheet

ART114

ATCA Rear I/O Transition Module

  • ATCA rear I/O Module for Blades
    • i.e. Sun Microsystems Netra Blade CP3260,CP3220, ATC114, etc.
  • Two on board 2.5” SAS/SATA Disks
  • Disks run as independent or RAID 0 or 1
  • QSFP connector for PCIe Expansion
    • The PCIe is Gen2
  • Front Blade Dual GbE to RJ-45 or LC Fiber (option for SX or LX)
  • Front Blade RS-232 to Micro DB-9
  • IPMI 2.0 Management Controller
View product ART114 Data Sheet

ART113

ATCA Rear I/O Transition Module

  • ATCA rear I/O Module for Blades
    • i.e. Sun Microsystems Netra Blade CP3260, CP3220, VadaTech ATC114, etc.
  • VGA resolution @ 1920x1200 with 128MB
  • On board 2.5” SAS/SATA Disk
  • Three port USB 2.0 high speed (480Mbit/s)
  • Front Blade Dual GbE to RJ-45 or LC Fiber (option for SX or LX)
  • Front Blade RS-232 to DB-9
  • Dual RS-232 for the host blade
  • IPMI 2.0 Management Controller
View product ART113 Data Sheet

ART112

ATCA Rear I/O Transition Module

  • ATCA rear I/O Module for Blades
    • i.e. Sun Microsystems Netra Blade CP3260, CP3220, VadaTech ATC114, etc.
  • VGA resolution @ 1920x1200 with 128MB
  • SAS Expander via I-PASS connector
    • for JBOD
  • On board 2.5” SAS/SATA Disk
  • Three port USB 2.0 high speed (480Mbit/s)
  • Front Blade Dual GbE to RJ-45 or LC Fiber (option for SX or LX)
  • Front Blade RS-232 to DB-9
  • IPMI 2.0 Management Controller
View product ART112 Data Sheet

ART129A

Rear Transition module for ATC129

  • AdvancedTCA RTM for VadaTech ATC129 Blade
  • Dual removable 2.5” SATA Disk
  • Dual USB2.0
  • PMI 2.0 compliant
View product ART129A Data Sheet

ATCA RTM Storage

( expand all )

ART116

ATCA Rear I/O Transition Module

ART115

ATCA Rear I/O Transition Module

ART114

ATCA Rear I/O Transition Module

ART113

ATCA Rear I/O Transition Module

ART112

ATCA Rear I/O Transition Module

ART129A

Rear Transition module for ATC129