Log in

You are accessing a protected product information and must login.

If you are a VadaTech customer and have not yet registered, please contact sales@vadatech.com to provide you VadaTech customer account information.

I accept VadaTech copyright information.

Register

(Reload image)

Submit

Change Password

Submit

Forgot Password

Please enter your email registered at VadaTech and we will send you your password.

Submit

Back to login

You are here: HomeProductsVPXChassis

Chassis

VadaTech offers a range of chassis for 3U VPX modules, with both vertical and horizontal board mount configurations. Please contact sales directly for specific requirements not yet listed here.

VPX Chassis

( close )

VTX980

One Slot 3U VPX Benchtop Development Chassis with RTM (P0 to P2 installed)

One slot benchtop 3U VPX development platform
P0 to P2 connectors are installed
Variable fan speed control for front and rear
Removable panels for ease of access for probing
Support for Rear Transition Modules (RTMs)
Allows for a shelf manager to do health monitoring
JTAG connector
User setting of SYSRESET, NVMRO, etc.
Onboard battery pack to provide the VBAT
Vertical or Horizontal positioning on bench

View product VTX980 Data Sheet

VTX985

Two Slot 3U VPX Rackmount Chassis with RTM for Conduction Cooled Module

Two slot 3U VPX platform for Conduction cooled modules
19” Rackmount
Multiple backplane configurations for VITA 66.4, VITA 66.5, VITA 67.2, etc. by selectable connector options
Chassis monitors the temperature of the wedge lock and maintains the required level
Support for Rear Transition Modules (RTMs)
Health monitoring via shelf manager
JTAG connector
User setting of SYSRESET, NVMRO, etc.
VBAT provided by onboard battery pack

View product VTX985 Data Sheet

VTX662

8U VPX Chassis, Dual Six 3U Slots with RTM Support

8U Open VPX rackmount system platform
Total of 12 slots divvied among two-half of the chassis for full redundancy
Dual Dedicated Switch/management slots
Up to Dual five 3U VPX payload slots
Compatible with 0.8-inch, 0.85-inch and 1.0-inch modules
Support for Rear Transition Modules (RTMs)
Dual redundant cooling in push/pull front-to-back airflow configuration per each half of the chassis
Optional Dual JTAG Switch Module (JSM)

View product VTX662 Data Sheet

VTX959

1U Open VPX Rackmount Chassis, Two Independent 3U Payload Slots

1U Open VPX Rackmount platform with two 3U VPX payload slots. Compatible with 0.8-inch, 0.85-inch, 1.0-inch and. 1.2-inch modules
Support for two conduction cooled modules only
Two independent slots
Two independent input power supply (AC Universal or DC 9-36V)
Two independent cooling units
Front to back cooling
Each slot wedges can be kept at a fixed temperature (dynamic cooling)
Selected P1/P2 I/O are routed to the front

View product VTX959 Data Sheet

VTX866

11U VPX Chassis, Twelve 6U Slots with RTM Support

11U Open VPX rackmount system platform
Dual Dedicated Switch/management slots
Up to ten 6U VPX payload slots (with two slots that can have up to 10 HP)
Compatible with 0.8-inch, 0.85-inch and 1.0-inch modules
Support for Rear Transition Modules (RTMs)
Redundant cooling in push/pull front-to-back airflow configuration
Optional JTAG Switch Module (JSM)

View product VTX866 Data Sheet

VTX994

One Slot 6U VPX Benchtop and Rackmount Chassis with RTM for Conduction Cooled Development

One slot 6U VPX benchtop platform for Conduction cooled modules
Vertical/Horizontal Benchtop positioning or 19” Rackmount option
Multiple backplane configurations for VITA 66.4, VITA 66.5, VITA 67.2, etc. by selectable connector options
Chassis monitors the temperature of the wedgelock and maintains the required level
Removable panels allow ease of access for probing
Support for Rear Transition Modules (RTMs)
Health monitoring via shelf manager (optional)
JTAG connector
User setting of SYSRESET, NVMRO, etc.
VBAT provided by onboard battery pack

View product VTX994 Data Sheet

VTX879

NEW

½ ATR Short VPX Chassis with Five 3U Slots and ARINC 600 style I/O Connector

½ ATR Short VPX style system platform
Up to five 3U VPX payload slots
Conduction cooled modules per VITA 48
Power via 3U power Module• ARINC 600 style for I/O

View product VTX879 Data Sheet

VTX350

6U VPX Chassis with Fiber Optic I/O

6U VPX Chassis, 19” Rack Mountable per EIA-310D
Rugged Chassis with High Density Fiber Optic I/O
Fiber Optical Backplane per VITA 66.4 or 66.5
Nine External Fiber I/O MIL-PRF-28876 Connectors
Three External MIL-DTL-5015 I/O connectors for Power & Discrete Signals
One Chassis Management (VITA 46.11 Tier 2 Command Set, IPMI 2.0 Compliant) slot with JTAG Switch Module (JSM)
Dual-Redundant VPX Power Supply slots
Six 6U VPX Payload slots on Base Configuration
Inlet/Outlet Airflow baffle plate provision for optimized slot cooling

View product VTX350 Data Sheet

VTX865

11U VPX Chassis, Six 6U Slots with RTM Support

11U Open VPX rackmount system platform
Dedicated Switch/management slot
Up to five 6U VPX payload slots
Compatible with 0.8-inch, 0.85-inch and 1.0-inch modules
Support for Rear Transition Modules (RTMs)
Redundant cooling in push/pull front-to-back airflow configuration
Optional JTAG Switch Module (JSM)

View product VTX865 Data Sheet

VTX981

One Slot 3U VPX Benchtop Development Chassis with RTM (P2 with two VITA 66.5/66.4)

One slot benchtop 3U VPX development platform
P2 with two VITA 66.5 or 66.4 connectors option
Variable fan speed control for front and rear
Removable panels for ease of access for probing
Support for Rear Transition Modules (RTMs)
Allows for a shelf manager to do health monitoring
JTAG connector
User setting of SYSRESET, NVMRO, etc.
Onboard battery pack to provide the VBAT
Vertical or Horizontal positioning on bench

View product VTX981 Data Sheet

VTX990

One Slot 6U VPX Benchtop Development Chassis with RTM (P0 to P6 installed)

One slot benchtop 6U VPX development platform
P0 to P6 connectors are installed
Variable fan speed control for front and rear
Removable panels for ease of access for probing
Support for Rear Transition Modules (RTMs)
Allows for a shelf manager to do health monitoring
JTAG connector
User setting of SYSRESET, NVMRO, etc.
Onboard battery pack to provide the VBAT
Vertical or Horizontal positioning on bench

View product VTX990 Data Sheet

VTX991

One Slot 6U VPX Benchtop Development Chassis with RTM (P4 to P6 with six VITA 66.4/66.5)

One slot benchtop 6U VPX development platform
P4 to P6 with six VITA 66.4 or 66.5 connectors option
Variable fan speed control for front and rear
Removable panels for ease of access for probing
Support for Rear Transition Modules (RTMs)
Allows for a shelf manager to do health monitoring
JTAG connector
User setting of SYSRESET, NVMRO, etc.
Onboard battery pack to provide the VBAT
Vertical or Horizontal positioning on bench

View product VTX991 Data Sheet

VTX951

1U Open VPX Rackmount Chassis, Two 3U Payload Slots, RTM Slot with Integrated Intel W-11865MRE

1U Open VPX Rackmount platform with two 3U VPX payload slots. Compatible with 0.8-inch, 0.85-inch and 1.0-inch modules
Integrated Intel® Xeon® Processor W-11865MRE (Tiger Lake-H) with 8 cores.
PCIe Gen4 x8 to each of the VPX module
Dual Display Port (DP) for Video and dual 10GBaset-T
Serial Over LAN (SOL)
32 GB of DDR4 memory with ECC
M.2 NVMe removable storage
Support for Rear Transition Modules (RTMs)
Shelf Manager for health management with Tier two support
Layer two managed switch supports IEEE1588V2
Sophisticated clocking features
Virtual JTAG capabilities for remote programming and debugging eases FPGA Code development
Redundant cooling in push/pull side-to-side airflow configuration (front and rear), removable fan tray and air filter

View product VTX951 Data Sheet

VTX880

2U VPX Chassis, Six 3U Slots with RTM Support

2U Open VPX rackmount system platform
Horizontal slots
Dedicated Switch/management slot
Up to five 3U VPX payload slots
Compatible with 0.8-inch, 0.85-inch and 1.0-inch modules
Support for Rear Transition Modules (RTMs)
Redundant cooling in push/pull side to side airflow configuration
Optional JTAG Switch Module (JSM)

View product VTX880 Data Sheet

VTX955

1U Open VPX Rackmount Chassis, Two 3U Payload Slots with RTM Support

1U Open VPX Rackmount platform with two 3U VPX payload slots. Compatible with 0.8-inch, 0.85-inch and 1.0-inch modules
Support for conduction cooled modules
Support for Rear Transition Modules (RTMs)
Shelf Manager for health management with Tier two support
Layer two managed switch with support for IEEE1588V2
Sophisticated clocking features
Virtual JTAG capabilities for remote programming and debugging eases FPGA Code development
Redundant cooling in push/pull side-to-side airflow configuration (front and rear), removable fan tray and air filter

View product VTX955 Data Sheet

VTX881

2U VPX Chassis, Three 6U Slots with RTM Support

2U Open VPX rackmount system platform
Horizontal slots
Dedicated Switch/management slot
Up to two 6U VPX payload slots
Compatible with 0.8-inch, 0.85-inch and 1.0-inch modules
Support for Rear Transition Modules (RTMs)
Redundant cooling in push/pull side to side airflow configuration
Optional JTAG Switch Module (JSM)

View product VTX881 Data Sheet

VTX661

8U VPX Chassis, Twelve 3U Slots with RTM Support

8U Open VPX rackmount system platform
Dual Dedicated Switch/management slots
Up to ten 3U VPX payload slots (with two slots that can have up to 10 HP)
Compatible with 0.8-inch, 0.85-inch and 1.0-inch modules
Support for Rear Transition Modules (RTMs)
Redundant cooling in push/pull front-to-back airflow configuration
Optional JTAG Switch Module (JSM)

View product VTX661 Data Sheet

VTX660

8U VPX Chassis, Six 3U Slots with RTM Support

8U Open VPX rackmount system platform
Dedicated Switch/management slot
Up to five 3U VPX payload slots
Compatible with 0.8-inch, 0.85-inch and 1.0-inch modules
Support for Rear Transition Modules (RTMs)
Redundant cooling in push/pull front-to-back airflow configuration
Optional JTAG Switch Module (JSM)

View product VTX660 Data Sheet

VTX870

7U VPX Benchtop Chassis, Six 3U Slots with RTM Support

Open VPX benchtop development platform
Dedicated Switch/management slot
Up to five 3U VPX payload slots
Compatible with 0.8 Inch, 0.85 Inch and 1.0 Inch modules
Support for Rear Transition Modules (RTMs)
Redundant cooling in push/pull bottom-to-top airflow configuration
Front panel system health display
Optional JTAG Switch Module (JSM)
Removable side panels for ease of board probing

View product VTX870 Data Sheet

VTX352

NEW

Four Slot VPX Harden Chassis for 6U VPX Modules with Dual Power Entry Modules

VPX Harden Chassis for four slot 6U VPX Modules
VITA 66.5 for Optics and VITA67.2 for RF
Dual VPX Power Entry Module (PEM)
Conduction Cooled modules per VITA 48
All I/O are via MIL-STD38999 connectors

View product VTX352 Data Sheet

VTX989

Five slots 3U VPX conduction cooled Chassis

VTX989 is a five slot 3U VPX conduction cool chassis
Base plate cooling (cold wall is in the bottom of the chassis)
Integrated Power Module within the Chassis
Support for VITA67.2 coaxial/RF for four of the slots (defaultbackplane routing)
All I/O are thru the front of the chassis
250W integrated Power Supply
Horizontal mount for the four standard 3U VPX module
The fifth slot and the Power Module dissipate heat through theskyline to the base plate

View product VTX989 Data Sheet

VTX351

6U VPX Backplane With Optics To The Rear

6U VPX backplane
Rugged Chassis and Fiber Optics per VITA 66.5
Rear Mezzanine Cards w/ IO
Dual-Redundant VPX Power Supply slots
Eight 6U VPX Payload slots

View product VTX351 Data Sheet

VTX995

Two Slot 6U VPX Rackmount Chassis with RTM for Conduction Cooled Module

Two slot 6U VPX platform for Conduction cooled modules
19” Rackmount
Multiple backplane configurations for VITA 66.4, VITA 66.5, VITA 67.2, etc. by selectable connector options
Chassis monitors the temperature of the wedgelock and maintains the required level
Support for Rear Transition Modules (RTMs)
Health monitoring via shelf manager
JTAG connector
User setting of SYSRESET, NVMRO, etc.
VBAT provided by onboard battery pack

View product VTX995 Data Sheet

VTX875

10U VPX Benchtop Chassis, Six 6U Slots with RTM Support

Open VPX benchtop development platform
Dedicated Switch/management slot
Up to five 6U VPX payload slots
Compatible with 0.8 Inch, 0.85 Inch and 1.0 Inch modules
Support for Rear Transition Modules (RTMs)
Redundant cooling in push/pull bottom-to-top airflow configuration
Front panel system health display
Optional JTAG Switch Module (JSM)
Removable side panels for ease of board probing

View product VTX875 Data Sheet

VTX982

One Slot 3U VPX Benchtop Development Chassis with RTM (P2 with VITA 67.2)

One slot benchtop 3U VPX development platform
P2 with VITA 67.2 connector option
Variable fan speed control for front and rear
Removable panels for ease of access for probing
Support for Rear Transition Modules (RTMs)
Allows for a shelf manager to do health monitoring
JTAG connector
User setting of SYSRESET, NVMRO, etc.
Onboard battery pack to provide the VBAT
Vertical or Horizontal positioning on bench

View product VTX982 Data Sheet

VPX Chassis

( expand all )

Log in

Register

Change Password

Forgot Password

Choose your region:

By Part Number

By Function

By Architecture

Software & Tools

Design Services/Custom Products

Products DownloadCenter Portal

Chassis