AMC510

FPGA Carrier, Double Module/Full Size

  • AMC FPGA carrier to add customized mezzanine modules
  • Clock, Trig, and Sync in/out
  • AMC Ports 0-1 and 4-11 are routed to FPGA (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • Xilinx Virtex-5 FPGA in FF1136 package
  • AMC FCLK, CLKA, CLKB, CLKC and CLKD are routed
  • On board PLL for buffering/multiplying and jitter cleaner
  • Option for QDR-II
  • RoHS compliant

Download Datasheet Add to Info Request

add to compare
0

The AMC510 is an AMC FPGA Carrier so that it would allow custom mezzanines to be developed for different end applications. The module is compliant to the AMC.1, AMC.2 and/or AMC.4 specification. The unit has an on-board, re-configurable FPGA which interfaces directly to the AMC Ports 0-1, 4-11, FCLK, ACLK, BCLK, CCLK, and DCLK. The FPGA has an interface to the QDR-II memory (36 and 72-bit wide).This allows for large buffer sizes to be stored during processing as well as for queuing the data to the host. The AMC510 allows for external clocking as well as internal clocking. The clock goes through an on-board PLL for buffering/multiplying and jitter cleaner. Trig in/out, Clock in/out and Sync in/out have an SMB connector in the front.

Key Features
  • AMC FPGA carrier to add customized mezzanine modules
  • Clock, Trig, and Sync in/out
  • AMC Ports 0-1 and 4-11 are routed to FPGA (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • Xilinx Virtex-5 FPGA in FF1136 package
  • AMC FCLK, CLKA, CLKB, CLKC and CLKD are routed
  • On board PLL for buffering/multiplying and jitter cleaner
  • Option for QDR-II
  • RoHS compliant
Benefits
  • Double width/full size FPGA Carrier has more space on front panel for custom I/O
  • Three SMA connectors and indicator LEDs integrated on front panel
  • Design utilizes proven VadaTech subcomponents andengineering techniques
  • Electrical, mechanical, software, and system-levelexpertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty  modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

UTC002

MicroTCA Carrier Hub, 2nd Generation

  • 400 MHz CPU with 64 MB DDR for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
  • Layer 2 managed GbE to each AMC (optional)
  • Non-blocking PCIe Gen 3 (x4), to each slot with option for SRIO or 10GbE (Layer 2 managed)
  • Redundant boot system to ensure fail-safe upgrades
  • Automatic fail-over with dual UTC002
  • SAS/SATA to each AMC (optional)
  • Telecom/GPS clock (Stratum-3)
  • Fabric clock with spread spectrum capability
  • Single module, full size per AMC.0
  • HPM.1 and IPMI 2.0 compliant
View product UTC002 Data Sheet

UTC010

MicroTCA DC Power Module, 792W

  • Dual -36VDC to -75VDC input,
  • 792W (available in 396W)
  • Hot swappable with support for power module redundancy
  • Available in MTCA.3 Conduction Cooled version
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Modules can be turned on without an MCH in the system
  • External as well as internal WDT
View product UTC010 Data Sheet

VT857

1U uTCA Chassis, Deep, 12 AMC, 10GbE

  • Twelve mid-size single module AMC slots or six mid-size double module AMC slots
  • Cascade any number of 1U Carriers for expansion and management
  • Management can run as Shelf/MCMC (MicroTCA Carrier Management Controller) or MCMC
  • AMC.2 and AMC.3 compliant
  • Fabric Expansion to other 1U chassis
  • 10GbE available on ports 4-7 and 8-11
  • GbE Managed Layer Two (ports 0 and 1)
  • Telco Alarm and Carrier Locator
  • JTAG Switch Module (JSM) with front port access
  • Telecom/GPS Clock on TCLKA, TCLKB, TCLKC and TCLKD and Fabric Clock on FCLK
  • Redundant 1+1 Power supply
  • Redundant Cooling Units (CU)
  • Removable Power supply, Air Filter and Fan Trays
View product VT857 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.