ATCA Rear Transition Module

  • Quad GbE via SFP
  • Dual InfiniBand 40Gb via QSFP+
  • PCIe x8 via I-Pass
  • Host serial
  • USB Fiber and Copper
  • IPMI Version 2.0 compliant
  • RoHS compliant

Download Datasheet Add to Info Request

add to compare
0

The ART132 is an I/O expansion ATCA Rear Transition Module(ARTM) that provides PCIe, GbE, InfiniBand, USB andManagement I/O for the front blade. The module is designed tomate with Emerson front blades such as ATCA-7360 andATCA-7365.

A PCIe x8 port from zone three connector is routed to the I-Passconnector. This allows the PCIe from the host to be expandedto other modules.

The module has quad GbE MAC/PHY which mates to the hostvia PCIe x4 on the zone 3 connector and provides quad SFP tothe rear. Further, the module has a dual port InfiniBand QDRHCA which mates to the host via PCIe x8 and provides dualQSFP+ to the rear (40Gb/s per QSFP+).

The USB port from the zone 3 connector feeds into an on-boardUSB HUB and is converted to dual LC fiber ports and fivecopper ports via micro-DB-25 connector.

The ART132 also provides the management RS-232 port aswell as the host RS-232 port to the rear.

Key Features
  • Quad GbE via SFP
  • Dual InfiniBand 40Gb via QSFP+
  • PCIe x8 via I-Pass
  • Host serial
  • USB Fiber and Copper
  • IPMI Version 2.0 compliant
  • RoHS compliant
Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

ATC800

48-Port GbE with 10-GbE Uplink Switch

  • AdvancedTCA open standard form factor
  • Linux operating system
  • Open Architect™ firmware 
  • Run as the Shelf Manager or Node board
  • Five front panel 10/100/1000Base-T ports
  • Nine front panel SFP ports
  • Front panel XFP egress port for 10GbE
  • GbE to Base Interface for 14 payload slots and Shelf Manager
  • Eighteen GbE ports to Zone 3 for use with an RTM
  • 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
  • PICMG 3.1 compliant
  • IEEE 802.3 compliant
  • IPMI Version 2.0 compliant
View product ATC800 Data Sheet

ATC808

Low Cost 26 Port ATCA Switch

  • AdvancedTCA open standard form factor
  • PICMG 3.1 compliant
  • Managed Layer 2 switch
  • GbE to Base Interface for 15 Node slots
    • plus two Shelf
  • One port to the update channel
  • Eight front panel SFP connectors for mix of Copper and Fiber interfaces
  • Support up to 8K MAC address
  • 4K IEEE 802.1Q VLANs
  • VLAN-based packet filtering
  • Packet classification using IEEE802.1p QoS
  • 9K Jumbo frames
  • Spanning tree, Mirroring, QoS
  • SNMP and RMON
  • OS support for:
    • OS independent
View product ATC808 Data Sheet

VT830

6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers

  • 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
  • 10GbE/GbE Managed Layer 2
  • 40GbE/10GbE/GbE Managed Layer 3
  • 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
  • Split power distribution (odd slots on A1/B1,even slots on A2/B2)
  • Redundant Power supplies AC (DC or AC/DC optional)
  • Up to four AC supply at 1300W each (N+1)
  • 6 Rear Transition Module (RTM) slots
View product VT830 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.