ATCA Rear Transition Module

  • Single GbE L2 Switch Fabric
  • Dual XAUI interface to the host
  • L2 Light Management
    • Port Trunking
    • Port Mirroring
    • VLAN, etc.
  • Routes host 10/100/1000 GbE to RJ-45
  • Routes host RS-232 to RJ-45
  • IPMI 2.0 Management Controller

Download Datasheet Add to Info Request

add to compare
0

The ART110 is a Rear Transition Module (RTM) that brings expandability to the host board. The ART110 has single GbE L2 switch fabrics with XAUI interfaces to the host. This design allows complete isolation between the two XAUI ports by configuring the ports into their appropriate VLAN. The GbE switch has management such as port trunking, mirroring, VLAN, etc. which is configured via the management serial port, the shelf manager or the host IPMI controller (assuming the host IPMI controller has OEM command capability). 

The module hosts a total of 12 SFP cages; providing the flexibility of using any combination of fiber or copper.

The ART110 further routes the host 10/100/1000 GbE port as well as the host RS-232 to RJ-45’s for ease of access. 

Key Features
  • Single GbE L2 Switch Fabric
  • Dual XAUI interface to the host
  • L2 Light Management
    • Port Trunking
    • Port Mirroring
    • VLAN, etc.
  • Routes host 10/100/1000 GbE to RJ-45
  • Routes host RS-232 to RJ-45
  • IPMI 2.0 Management Controller
Benefits
  • Full front ATCA board and compatible RTM solution available from VadaTech
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house 
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

ATC800

48-Port GbE with 10-GbE Uplink Switch

  • AdvancedTCA open standard form factor
  • Linux operating system
  • Open Architect™ firmware 
  • Run as the Shelf Manager or Node board
  • Five front panel 10/100/1000Base-T ports
  • Nine front panel SFP ports
  • Front panel XFP egress port for 10GbE
  • GbE to Base Interface for 14 payload slots and Shelf Manager
  • Eighteen GbE ports to Zone 3 for use with an RTM
  • 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
  • PICMG 3.1 compliant
  • IEEE 802.3 compliant
  • IPMI Version 2.0 compliant
View product ATC800 Data Sheet

VT000

ATCA Power Module

  • Powers a single ATCA module
  • IPMI hardware address and parity
  • Fuse on each of the power rails
  • Enable switch
  • Connector for IPMI Bus A and B
  • Allows connection to shelf managers (such as VadaTech’s bench-top style VT007)
  • Test points
  • RoHS compliant
View product VT000 Data Sheet

VT830

6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers

  • 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
  • 10GbE/GbE Managed Layer 2
  • 40GbE/10GbE/GbE Managed Layer 3
  • 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
  • Split power distribution (odd slots on A1/B1,even slots on A2/B2)
  • Redundant Power supplies AC (DC or AC/DC optional)
  • Up to four AC supply at 1300W each (N+1)
  • 6 Rear Transition Module (RTM) slots
View product VT830 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.