Complete ATCA IPMI Test Suite

  • Capture and store I2C bus data
  • Analyzer mode
  • Exerciser mode
  • Compliance test mode
  • Graphical User Interface (GUI)
  • Field-upgradable firmware
  • Two 10/100 Mbit Ethernet ports routed to the front panel or to zone 2
  • Option for VadaTech VT028 for evaluation and testing
  • Option for VadaTech VT027 for evaluation and testing
  • VT027 option allows four NXP LPC2138’s to be programmed at a time
  • IPMI 2.0 compliant

Download Datasheet Add to Info Request

add to compare
0

VadaTech designed the ATC001 simulator in the ATCA form factor to test, capture and validate I2C traffic on the Intelligent Platform Management Bus (IPMB). The ATC001 utilizes an integrated VT001 IPMI controller to monitor or inject IPMI packets into the shelf. A Graphical User Interface (GUI) validates and displays the IPMI packets or schedules IPMI messages for injection into the shelf. The GUI application communicates with the integrated VT001 IPMI controller through an Ethernet port on the front panel or the rear (base channel on Zone 2). In the Zone 3 area, the ATC001 has eleven I2C connectors for expansion to other parts of the chas sis or external devices. The ATC001 facilitates creation of a robust test environment and real world simulation.

The ATC001 can also be loaded with VadaTech VT027 or VT028 IPMI controller based on the NXP LPC2138 Processor. This optional load allows development and evaluation of the VadaTech VT027/VT028 IPMI solution. The VT027 can manage up to eight AMC slots and connects directly to the ATCA IPMI bus while the VT028 is targeted for ATCA modules that don’t have any AMC slots. 

Key Features
  • Capture and store I2C bus data
  • Analyzer mode
  • Exerciser mode
  • Compliance test mode
  • Graphical User Interface (GUI)
  • Field-upgradable firmware
  • Two 10/100 Mbit Ethernet ports routed to the front panel or to zone 2
  • Option for VadaTech VT028 for evaluation and testing
  • Option for VadaTech VT027 for evaluation and testing
  • VT027 option allows four NXP LPC2138’s to be programmed at a time
  • IPMI 2.0 compliant
Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level
     expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

ATC800

48-Port GbE with 10-GbE Uplink Switch

  • AdvancedTCA open standard form factor
  • Linux operating system
  • Open Architect™ firmware 
  • Run as the Shelf Manager or Node board
  • Five front panel 10/100/1000Base-T ports
  • Nine front panel SFP ports
  • Front panel XFP egress port for 10GbE
  • GbE to Base Interface for 14 payload slots and Shelf Manager
  • Eighteen GbE ports to Zone 3 for use with an RTM
  • 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
  • PICMG 3.1 compliant
  • IEEE 802.3 compliant
  • IPMI Version 2.0 compliant
View product ATC800 Data Sheet

VT000

ATCA Power Module

  • Powers a single ATCA module
  • IPMI hardware address and parity
  • Fuse on each of the power rails
  • Enable switch
  • Connector for IPMI Bus A and B
  • Allows connection to shelf managers (such as VadaTech’s bench-top style VT007)
  • Test points
  • RoHS compliant
View product VT000 Data Sheet

VT830

6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers

  • 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
  • 10GbE/GbE Managed Layer 2
  • 40GbE/10GbE/GbE Managed Layer 3
  • 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
  • Split power distribution (odd slots on A1/B1,even slots on A2/B2)
  • Redundant Power supplies AC (DC or AC/DC optional)
  • Up to four AC supply at 1300W each (N+1)
  • 6 Rear Transition Module (RTM) slots
View product VT830 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.