μTCA JTAG Switch Module (JSM)

  • JTAG Switch Module (JSM) per μTCA specification
  • Provides Transparent Communications between the Arbitrated Master and a selected Secondary Port
  • Mates directory to the Chassis that have the JSM connector
  • Support for 12 AMC, 2 MCH, 4 Power Module, 2 Cooling units and Front/Rear (21 Ports)
  • Operations via Front/Back, or the two MCH
  • Auto-detection of Port Presence
  • Three Arbitrated Master ports
  • Configuration Mode Uses IEEE 1149.1 TAP controller
  • Operation up to 50MHz
  • LED for Activity, Master Grant, Secondary port selection

Download Datasheet Add to Info Request

add to compare
0

The UTC007 power comes from the management (+3.3V) or the payload (+12V) depending on the chassis configuration. The UTC007 consumes less than 55mW. The front connector is standard 0.1 header which mates to most JTAG modules. There are three Arbitrated Master ports (2 MCH and the front/rear connector). The secondary ports are auto detected if they are present. The modules provides transparent communication between the Master and a selected secondary port. All configuration modes uses IEEE1149.1 TAP controller. The JTAG can operate with up to 50MHz clock.

Key Features
  • JTAG Switch Module (JSM) per μTCA specification
  • Provides Transparent Communications between the Arbitrated Master and a selected Secondary Port
  • Mates directory to the Chassis that have the JSM connector
  • Support for 12 AMC, 2 MCH, 4 Power Module, 2 Cooling units and Front/Rear (21 Ports)
  • Operations via Front/Back, or the two MCH
  • Auto-detection of Port Presence
  • Three Arbitrated Master ports
  • Configuration Mode Uses IEEE 1149.1 TAP controller
  • Operation up to 50MHz
  • LED for Activity, Master Grant, Secondary port selection
Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level
     expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC610

AMC 4 Port Gigabit Ethernet with 2.5” Disk

  • AMC.1 and AMC.3
  • Single-width, mid size (option for full size)
  • 4 Gigabit Ethernet ports via RJ-45
  • On board 2.5” disk with direct connect toPorts 2 and 3
  • PCIe Gen2 x4 lanes to Ports 4-7
  • IPMI 2.0 compliant
  • RoHS compliant
  • OS support for:
    • Linux
    • Windows
    • Solaris
    • VxWorks
View product AMC610 Data Sheet

UTC002

MicroTCA Carrier Hub, 2nd Generation

  • 400 MHz CPU with 64 MB DDR for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
  • Layer 2 managed GbE to each AMC (optional)
  • Non-blocking PCIe Gen 3 (x4), to each slot with option for SRIO or 10GbE (Layer 2 managed)
  • Redundant boot system to ensure fail-safe upgrades
  • Automatic fail-over with dual UTC002
  • SAS/SATA to each AMC (optional)
  • Telecom/GPS clock (Stratum-3)
  • Fabric clock with spread spectrum capability
  • Single module, full size per AMC.0
  • HPM.1 and IPMI 2.0 compliant
View product UTC002 Data Sheet

UTC010

MicroTCA DC Power Module, 792W

  • Dual -36VDC to -75VDC input,
  • 792W (available in 396W)
  • Hot swappable with support for power module redundancy
  • Available in MTCA.3 Conduction Cooled version
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Modules can be turned on without an MCH in the system
  • External as well as internal WDT
View product UTC010 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.