AMC725

Xeon E3 Processor, 10GbE, MTCA.4, Double Module, AMC

LEGACY *
  • Double-module, mid-size per AMC.0 and MTCA.4
  • Intel® Xeon E3 processor options with PCH
  • DVI graphics (SM750 w/ 16 MB DDR) up to 1920x1440 resolution
  • PCIe Gen3 on ports 4-7 and 8-11 or single PCIe x8 on ports 4-11 (AMC.1)
  • GbE on ports 0 and 1 (AMC.2) and SATA on ports 2 and 3 (AMC.3)
  • PCIe Gen3 x8, dual SATA and quad USB to RTM
  • Dual 10GbE via SPF+ and dual GbE via RJ-45 to front panel

Download Datasheet Add to Info Request

add to compare
0

The AMC725 is a Processor AMC (PrAMC) in a MTCA.4 double-module, mid-size AMC form factor. It features an Intel® Xeon E3 Processor with Cave Creek PCH, and on-board dual RAID options. The module provides PCIe Gen3 x4 or single x8 on ports 4-11 per AMC.1, dual GbE on ports 0 and 1 per AMC.2, and SATA on ports 2 and 3 per AMC.3. Dual 10 GbE ports are included on the front panel.

The AMC725 comes with 16 GB of DDR3 memory with ECC. It routes PCIe, USB and SATA signals to the RTM connector for further expansion. The Serial over LAN with hardware RNG (Random Number Generator) acts as a seed generator for authentication. The BIOS allows booting from on-board Flash, off-board SATA, PXE boot, and USB.

The Solid State Drives (SSDs) with no moving parts allows for high speed data storage and retrieval. When the SSDs are used in RAID configuration they provide greater reliability and power efficiency.

Key Features
  • Double-module, mid-size per AMC.0 and MTCA.4
  • Intel® Xeon E3 processor options with PCH
  • DVI graphics (SM750 w/ 16 MB DDR) up to 1920x1440 resolution
  • PCIe Gen3 on ports 4-7 and 8-11 or single PCIe x8 on ports 4-11 (AMC.1)
  • GbE on ports 0 and 1 (AMC.2) and SATA on ports 2 and 3 (AMC.3)
  • PCIe Gen3 x8, dual SATA and quad USB to RTM
  • Dual 10GbE via SPF+ and dual GbE via RJ-45 to front panel
Benefits
  • High-performance Xeon E3 processor with dual 10 GbE ports to the front panel
  • Highly versatile combination of distributed processing, storage options, and RTM routing configurations
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC520

AMC 10-channel ADC, MicroTCA.4

  • Double module AMC, compliant to μTCA.4
  • Ten channel of ADC with 125MSPS @ 16-bit resolution utilizing AD9268 device
  • Dual DAC with 250 MSPS @ 16-bit resolution utilizing MAX5878 device (this is user programmable for lower sampling rate)
  • Internal clock or precision external clock from RTM/backplane/front panel clocks
  • Trig in/out configurable by software (external trigger via front or port 17)
  • Backplane PCIe Dual x4 or x8/Dual GbE
  • Xilinx Virtex-6 FPGA in FF1759 package
  • Option for QDR-II+
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Dual SFP+ (up to 6.6Gbps)
  • JTAG selectable front and backplane
  • AMC.1 and AMC.2 (FPGA programmable)
View product AMC520 Data Sheet

UTC018

AC Power Module, 1000W

  • Double-module, 12HP size module per AMC.0
  • Universal AC input (85 to 265V), 1000W
  • Provides power up to 12 AMCs, 2 MCHs and Cooling Units
  • Very low ripple voltage on +12V
  • Hot swappable with two banks of 256K flash for redundancy
  • Dual IPMI bus
  • 32–bit RISC processor
View product UTC018 Data Sheet

VT811

8U uTCA.4 Chassis Platform

  • uTCA.4 Chassis Platform with rear I/O
  • 19” x 8U x 14.9” deep (with handles 16.23” deep)
  • Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and quad Power Modules
  • Up to twelve AMCs: 12 mid-size double module front module with 12 mid-size double module RTMs
  • Provision to route cables from the front to the back
  • Radial I2C bus to each AMC
  • High-speed 30 layer passive backplane
  • Redundant FRU information devices and carrier locator
  • Dual 1000W AC Power supply option Telco Alarm FCLKA, TCKA, TCKB, TCLKC AND TCLKD
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front
View product VT811 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.

* Legacy product only – not recommended for new applications