3U ATCA Hybrid Chassis with 8 AMCs AMCs (Mid-size)

  • 19” rack mount 3U ATCA Hybrid AMC Chassis
  • 1x ATCA slot, 8 mid-size AMC slots and 2x ATCA RTM slots
  • 40G or 10G fabric across the backplane
  • x8 PCIe Gen3, x4 Gen3 SRIO, or Layer 2/3 managed 10GbE/40GbE dual XAUI
  • Redundant push/pull cooling configuration
  • Integrated dual shelf managers, switch and AMC carrier
  • Full redundancy for all FRUs
  • Redundant AC or DC Power Modules
  • ESD Jack

Download Datasheet Add to Info Request

add to compare

The VT835 offers unprecedented performance density with a ATCA node slot and 8 mid-size, single width AMCs in 3U height. Typically, only 4 mid-sized AMCs can fit on an ATCA carrier, but with VadaTech’s unique design, 8 AMCs can fit in a single chassis to provide AMC’s versatility of processors, FPGAs, storage, graphics, I/O options and much more. Double-width AMCs can also be implemented.

The two slots support modules up to 400W, allowing the use of a high-power host processor and AMC. Additional I/O is available through two standard ATCA RTMs. The VT835 has full redundancy support for all FRUs, including dual Shelf Managers.

Power Supply

The VT835 is capable of providing single input power or redundant input power.

Cooling and Temperature Sensors

The VT835 has intelligent Cooling Units. The cooling airflow is from right to left. The removable air filter has a switch to detect its presence and can be monitored for when it needs to be replaced. Temperature sensors throughout the chassis monitor the intake and the outtake air temperature.

Shelf Input/Output

Rear Transition Module (RTM) are available per slot including the Switch/Shelf Manager slots.

Scorpionware™ Software

VadaTech’s Scorpionware software can be used to access information about the current state of the Shelf or the Carrier, obtain information such as the FRU population, or monitor alarms, power management, current sensor values, and the overall health of the Shelf. The software GUI is very powerful, providing a Virtual Carrier and FRU construct for a simple, effective interface.

 

Key Features
  • 19” rack mount 3U ATCA Hybrid AMC Chassis
  • 1x ATCA slot, 8 mid-size AMC slots and 2x ATCA RTM slots
  • 40G or 10G fabric across the backplane
  • x8 PCIe Gen3, x4 Gen3 SRIO, or Layer 2/3 managed 10GbE/40GbE dual XAUI
  • Redundant push/pull cooling configuration
  • Integrated dual shelf managers, switch and AMC carrier
  • Full redundancy for all FRUs
  • Redundant AC or DC Power Modules
  • ESD Jack
Benefits
  • Combines the processing power of AdvancedTCA with the versatility of MicroTCA in one chassis
  • Unprecedented performance density with 1 ATCA and 8 mid-size AMC in 3U height
  • High power supported for ATCA and AMC slots (400W)
  • Superior shelf management solution fromVadaTech
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC534

Altera Stratix® V GT FPGA, 100G

  • Altera Stratix® V GT FPGA in FFG-1517 package
  • Dual zQSFP+ Ports to the front panel
  • Front panel Port 0 at 100G, Port 1 at up to 40G
  • AMC Ports 4-7 and 8-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, XAUI, XLAUI, etc. are FPGA programmable)
  • Onboard Freescale QorIQ PPC2040 with DDR3
  • FPGA can load via Flash or via the P2040
  • FPGA Flash can be programmed via the JTAG or the P2040
View product AMC534 Data Sheet

AMC735

CN67XX Packet Processor, PrAMC based

  • Per AMC.1 and AMC.2 specification
  • Single module, mid size (full size option)
  • Cavium OCTEON CN67xx Multi-Core
  • Core processors rom 8 to 16 and
  • Speeds from 800Mhz to 1.5Ghz
  • DDR3 with ECC memory
  • Dual SFP+ socket supporting 10GbE
  • Gen2 PCIe x4 or XAUI to ports 4-7 and XAUI to ports 8-11
  • RTC
  • 8MB NOR and 32GB of NAND Flash
  • Serial Over LAN (SOL) capabilities
  • IPMI 2.0 compliant
  • RoHS compliant
  • OS support for:
    • Linux
    • VxWork
View product AMC735 Data Sheet

ATC807

Low Cost 26 Port 10 GbE & GbE

  • AdvancedTCA open standard form factor
  • PICMG 3.1 compliant
  • Managed Layer 2 10GbE and 1GbE switch
  • 10GbE to the Fabric channel
    • for 15 Node slots
    • option 9 or 1 selectable per port basis
  • GbE to Base Interface for 15 Node slots plus two Shelf
  • Eight SFP+ cages for 10GbE ports (each port can run as GbE or 10GbE)
  • Eight front panel 10/100/1000 Mbit Ethernet ports via RJ-45
  • VLAN-based packet filtering
  • Packet classification using IEEE802.1p QoS
  • 9K Jumbo frames
  • Spanning tree, Mirroring, &QoS
  • SNMP and RMON
  • OS support for:
    • OS independent
View product ATC807 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.