Altera Stratix® IV EP4S100Gx, FPGAFPGA

  • Single module, mid-size per AMC.0
  • Altera Stratix® IV EP4S100Gx in 1517 package
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • Onboard Freescale QorIQ PPC2040 (Quad Core Processor)
  • Ports 2 and 3 as SATA to P2040
  • Ports 0 and 1 are Muxed with P2040 GbE
  • FCLKA and TCLKA/D routed directly to FPGA
  • 2 GB of DDR3 to the FPGA with optional three banks of QDR-II+ (each 18-bit wide)
  • Conduction cooled version available

Download Datasheet Add to Info Request

add to compare
0

The AMC531 is based on the Altera Stratix® IV EP4S100Gx FPGA in 1517 package and is compliant to AMC.1, AMC.2, AMC.3 and/or AMC.4 specifications. It has two x4 Ports of XAUI/PCIe routing to the backplane and dual front-panel SFP+, making it ideal for wireless, wireline and broadcast markets.

Local DDR3 and optional QDR-II+ memory provide local buffering, while the onboard P2040 processor provides flexibility in board bring-up. The backplane clocks are routed to the FPGA for communication applications, and the P2040 supports offboard storage via Port 2/3 SATA connections.

The module is available as AMC531 for air-cooled (MTCA.0 and MTCA.1) and as AMC531C for rugged conduction-cooled (MTCA.2 or MTCA.3) applications.

See Intel FPGA Solutions for the advantages of using VadaTech products during application development.

 

 

VIDEO: Intel FPGA solutions at VadaTech: This video introduces the advantages of using VadaTech to build your new products embedding Intel FPGA SoC.

Key Features
  • Single module, mid-size per AMC.0
  • Altera Stratix® IV EP4S100Gx in 1517 package
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • Onboard Freescale QorIQ PPC2040 (Quad Core Processor)
  • Ports 2 and 3 as SATA to P2040
  • Ports 0 and 1 are Muxed with P2040 GbE
  • FCLKA and TCLKA/D routed directly to FPGA
  • 2 GB of DDR3 to the FPGA with optional three banks of QDR-II+ (each 18-bit wide)
  • Conduction cooled version available
Benefits
  • Dual front-panel SFP+ and dual x4 XAUI/PCIe provides balanced architecture
  • Onboard P2040 host simplifies system bring-up
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Block diagram

Related Products

FMC223

FMC High-speed DAC 14-bit at 2.5 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Single module  AD9739 DAC 14-bit at 2.5 GSPS
  • 2 Vpp differential Analog output swing
  • Programmable DSP clock
  • Dynamic performance
    • 8 QAM carriers @ 400 MHz IF –71 dBc
    • 16 QAM carriers @ 400 MHz IF –68 dBc
    • 32 QAM carriers @ 400 MHz IF –65 dBc
    • 72 QAM carriers @ 600 MHz IF –61 dBc
  • Single tone NSD @ 2.4 GSPS
    • 166 dBm/Hz @ 100 MHz IF
    • 162 dBm/Hz @ 1 GHz IF
  • Connection via MMCX for Analog Out and Reference Clock Input
  • Connection via LVDS for TRIG In/Out and GPIO
  • RoHS compliant
View product FMC223 Data Sheet

UTC020

DC Power Module, 936W

  • Single module, full-size per AMC.0
  • Dual -36V DC to -75V DC input, 936W (available in 468W)
  • Hot swappable with support for power module redundancy
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
View product UTC020 Data Sheet

VT899

7U uTCA Cube Chassis, 6 AMC

  • 7U μTCA Cube
  • 5” x 7U x 9” deep (with handles 10” deep)
  • Redundant Cooling Units
  • Up to six AMCs: 6 full size single module or 3 full size double module
  • Radial I2C bus to each AMC
  • Single Star passive 26 layer backplane
  • Redundant FRU information devices and carrier locator
  • Telco Alarm
  • CLK1, CLK2 and CLK3
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front
View product VT899 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.