2.5” SATA Drive, 6 Gbps RAID HBA, DVI-I

  • 2.5” SATA 6.0 Gbps drive HBA (Host Bus Adapter)
  • AMC.1 x1 PCIe Gen 2
  • Supports SATA ports at 6.0 Gbps
  • DVI-I for graphics interface
  • Independent disk or RAID 0, 1 and 10
  • Single module, compact-size (mid-size, full-size options available)
  • IPMI 2.0 compliant

Download Datasheet Add to Info Request

add to compare
0

The AMC638 is VadaTech second generation storage product for a 2.5" SATA disk drive in a single module, compact-size AdvancedMC™ (AMC) form factor to AMC.1. Ports 2 and 3 are routed to the backplane connector per AMC.3 specification. The module provides 2x the back-end transfer rate and 2x the front-end rate than previous VadaTech SATA AMCs.

Drives can be SSD or Rotary with 6 Gbps SATA. It also supports SATA mix Flash/Rotary disks with encryption. The AMC638 also has a DVI-I front panel interface for graphics module access.

Key Features
  • 2.5” SATA 6.0 Gbps drive HBA (Host Bus Adapter)
  • AMC.1 x1 PCIe Gen 2
  • Supports SATA ports at 6.0 Gbps
  • DVI-I for graphics interface
  • Independent disk or RAID 0, 1 and 10
  • Single module, compact-size (mid-size, full-size options available)
  • IPMI 2.0 compliant
Benefits
  • Combination of storage and graphics in single AMC
  • RAID solution with Host Bus Adapter providing higher transport speeds
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

UTC002

MicroTCA Carrier Hub, 2nd Generation

  • 400 MHz CPU with 64 MB DDR for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
  • Layer 2 managed GbE to each AMC (optional)
  • Non-blocking PCIe Gen 3 (x4), to each slot with option for SRIO or 10GbE (Layer 2 managed)
  • Redundant boot system to ensure fail-safe upgrades
  • Automatic fail-over with dual UTC002
  • SAS/SATA to each AMC (optional)
  • Telecom/GPS clock (Stratum-3)
  • Fabric clock with spread spectrum capability
  • Single module, full size per AMC.0
  • HPM.1 and IPMI 2.0 compliant
View product UTC002 Data Sheet

UTC020

DC Power Module, 936W

  • Single module, full-size per AMC.0
  • Dual -36V DC to -75V DC input, 936W (available in 468W)
  • Hot swappable with support for power module redundancy
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
View product UTC020 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.