ATCA “Mongoose 1” Video Mixer

  • Video Mixer (Windowing)
  • External Input: 4 Analog and 1 DVI-I
    • Analog or 24-bit Digital
  • Composite TV (CVBS), S-Video, RGB, YPbPr
  • Resolutions up to 1920x1200@60Hz
    • WUXGA
  • RS-170, RS-343, NTSC, PAL, SECAM, STANAG
  • 21.5MHz to 166MHz Pixel Clock Range
  • Composite Sync, Separate Sync, or Sync on Green/Y
  • Four video scalers for Window Zoom/Shrink/Crop/Pan/Position
  • External Output: Analog daisy-chain and 1 DVI-I (Analog and 24-bit Digital)
  • Z-Ordering, Alpha Blending, Chroma Keying on all 5 inputs
  • High-quality 30-bit Digital Video Processing Paths
  • Screen/Window Capture to file
  • Additional Graphics Layer w/ per-pixel Alpha Blending
  • Four GbE ports (2 to the base channels, 2 to the front panel)
  • RS-232 to the front panel
  • IPMI Management Controller

Download Datasheet Add to Info Request

add to compare
0

The Mongoose 1 is a high performance ATCA Video Mixer that takes in DVI-I graphics and outputs DVI-I graphics while simultaneously mixing in up to four additional analog video windowed or full-screen sources. The analog video sources come in on up to twelve analog signal lines which are arbitrarily structured into up to four composite (1 signal line), S-Video (2 signal lines), and/or component (3 signal lines) source groups by way of an on-board video cross-point switch. The analog video signals come in on two HD-15 connectors and either one of them can be dynamically selected to alsodaisy-chain out to another HD-15 connector for use by a second blade if desired.

The video mixer uses high-quality 3D comb filtering, motion-adaptive de-interlacing,and frame-rate conversion to match the analog video to the DVI-I input video. The analog sources can be scaled/cropped/panned/positioned arbitrarily with respect to the DVI-I graphics. The four analog inputs, DVI-I input, and internal graphics layer can then be z-ordered to determine which ones are on top of the others and then alpha blended or Chroma keyed for advanced video effects. The resulting full screen/window can be still-frame captured to a file without interrupting the on-screen video. The video mixer is controlled via Ethernet (using a C API library or CLI) or Serial (using a CLI). With the Mongoose 1, important input sources like charts, maps,and surveillance cameras can be over laid onto your PC desktop seamlessly to provide an integrated view of video and data sources.

Key Features
  • Video Mixer (Windowing)
  • External Input: 4 Analog and 1 DVI-I
    • Analog or 24-bit Digital
  • Composite TV (CVBS), S-Video, RGB, YPbPr
  • Resolutions up to 1920x1200@60Hz
    • WUXGA
  • RS-170, RS-343, NTSC, PAL, SECAM, STANAG
  • 21.5MHz to 166MHz Pixel Clock Range
  • Composite Sync, Separate Sync, or Sync on Green/Y
  • Four video scalers for Window Zoom/Shrink/Crop/Pan/Position
  • External Output: Analog daisy-chain and 1 DVI-I (Analog and 24-bit Digital)
  • Z-Ordering, Alpha Blending, Chroma Keying on all 5 inputs
  • High-quality 30-bit Digital Video Processing Paths
  • Screen/Window Capture to file
  • Additional Graphics Layer w/ per-pixel Alpha Blending
  • Four GbE ports (2 to the base channels, 2 to the front panel)
  • RS-232 to the front panel
  • IPMI Management Controller
Benefits
  • High performance video mixer blade
  • Low latency solution
  • 30-bit digital video processing instead of typical 24-bit
  • Native ATCA form factor
  • Instant PC-to-Monitor DVI connection in ‘bypass’mode, no need to wait for board boot to use display ATCA manageability
  • Electrical, mechanical, software, and system-levelexpertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC735

CN67XX Packet Processor, PrAMC based

  • Per AMC.1 and AMC.2 specification
  • Single module, mid size (full size option)
  • Cavium OCTEON CN67xx Multi-Core
  • Core processors rom 8 to 16 and
  • Speeds from 800Mhz to 1.5Ghz
  • DDR3 with ECC memory
  • Dual SFP+ socket supporting 10GbE
  • Gen2 PCIe x4 or XAUI to ports 4-7 and XAUI to ports 8-11
  • RTC
  • 8MB NOR and 32GB of NAND Flash
  • Serial Over LAN (SOL) capabilities
  • IPMI 2.0 compliant
  • RoHS compliant
  • OS support for:
    • Linux
    • VxWork
View product AMC735 Data Sheet

ATC133

10GbE Carrier w/ 4 Full-Size AMC Slots

  • 10G ATCA Carrier
  • Managed Layer 2 software
  • Four full-size AMC slots
  • Xilinx Virtex-7 FPGA
    • (XC7V690T in FFG1761 package)
  • Crossbar switch to connect FPGA to full mesh of backplane fabric
  • 2x XAUI ports and 2x GbE ports for each AMC slot
  • 4x XAUI ports for RTM expansion
  • Utilizes VadaTech’s proven IPMI Management Controller
View product ATC133 Data Sheet

VT830

6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers

  • 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
  • 10GbE/GbE Managed Layer 2
  • 40GbE/10GbE/GbE Managed Layer 3
  • 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
  • Split power distribution (odd slots on A1/B1,even slots on A2/B2)
  • Redundant Power supplies AC (DC or AC/DC optional)
  • Up to four AC supply at 1300W each (N+1)
  • 6 Rear Transition Module (RTM) slots
View product VT830 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.