AMC Carrier for PMC/XMC Modules, MTCA.4

  • Support for PMC and XMC modules
  • 64-bit PCI-X @ 133 MHz for the PMC
  • PCIe x4 to the XMC• AMC.1 compliant
  • PCIe x4 lanes to the AMC
  • PMC/XMC User I/O (J4 connector) routed to front panel and RTM
  • Trig signals per the uTCA.4 are routed from Ports 17 to 20 (per SLAC specification to the J4)
  • RoHS compliant
  • IPMI 2.0 compliant

Download Datasheet Add to Info Request

add to compare
0

The AMC105 is a double module, mid-size (full-size optional) board based on the AMC.1 Specification. The AMC105 allows PMC/XMC to be installed in an AMC slot. The PMC PCI-X bus can run at 133MHz.

The PMC/XMC J4 connector is routed to the front panel of the AMC module as a standard option via the Mini-SCSI connector. Alternatively, a limited amount of I/O can be routed to the RTM (Zone 3) per the SLAC specification (contact VadaTech for details).

Ports 17-20 that are defined in the uTCA.4 spec are routed on board so that the Trig signals could be driven from the PMC/XMC to the backplane.

This modular approach allows a MicroTCA chassis to utilize the large numbers of PMC/XMC modules that are available in the market.

Key Features
  • Support for PMC and XMC modules
  • 64-bit PCI-X @ 133 MHz for the PMC
  • PCIe x4 to the XMC• AMC.1 compliant
  • PCIe x4 lanes to the AMC
  • PMC/XMC User I/O (J4 connector) routed to front panel and RTM
  • Trig signals per the uTCA.4 are routed from Ports 17 to 20 (per SLAC specification to the J4)
  • RoHS compliant
  • IPMI 2.0 compliant
Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

FMC223

FMC High-speed DAC 14-bit at 2.5 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Single module  AD9739 DAC 14-bit at 2.5 GSPS
  • 2 Vpp differential Analog output swing
  • Programmable DSP clock
  • Dynamic performance
    • 8 QAM carriers @ 400 MHz IF –71 dBc
    • 16 QAM carriers @ 400 MHz IF –68 dBc
    • 32 QAM carriers @ 400 MHz IF –65 dBc
    • 72 QAM carriers @ 600 MHz IF –61 dBc
  • Single tone NSD @ 2.4 GSPS
    • 166 dBm/Hz @ 100 MHz IF
    • 162 dBm/Hz @ 1 GHz IF
  • Connection via MMCX for Analog Out and Reference Clock Input
  • Connection via LVDS for TRIG In/Out and GPIO
  • RoHS compliant
View product FMC223 Data Sheet

UTC020

DC Power Module, 936W

  • Single module, full-size per AMC.0
  • Dual -36V DC to -75V DC input, 936W (available in 468W)
  • Hot swappable with support for power module redundancy
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
View product UTC020 Data Sheet

VT899

7U uTCA Cube Chassis, 6 AMC

  • 7U μTCA Cube
  • 5” x 7U x 9” deep (with handles 10” deep)
  • Redundant Cooling Units
  • Up to six AMCs: 6 full size single module or 3 full size double module
  • Radial I2C bus to each AMC
  • Single Star passive 26 layer backplane
  • Redundant FRU information devices and carrier locator
  • Telco Alarm
  • CLK1, CLK2 and CLK3
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front
View product VT899 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.