AMC Time and Frequency with Onboard GPS and IRIG

  • GPS/PTP(1588)/IRIG/NTP Grand Master Clock
  • Synchronous Ethernet
  • Three arbitrary frequency disciplined clocks
  • Onboard GPS receiver
  • IRIG AM decoder input / IRIG DCLS input/output
  • AMC.1 Dual PCIe Gen2 x4 or AMC.2 Dual 10GbE
  • AMC.2 Dual 1000Base-X (one can mux to front RJ-45)
  • 100ns precision UTC timestamps, system status and GPS positions via PCIe
  • TSIP data Broadcast/Multicast/Unicast via Ethernet w/ bonding/failover
  • GPS NMEA serial port 
  • Battery or SuperCap Almanac/Ephemeris/Last position backup
  • 1 PPS PCIe interrupt, time events, time trigger for overall system/software synchronization
  • Holds over clocks/1PPS  using OCXO

Download Datasheet Add to Info Request

add to compare
0

The AMC005 provides a complete, feature-rich, GPS/PTP (1588)/IRIG/NTP bus-level timing solution to a MTCA/ATCA system, with exceptional flexibility.

The onboard GPS receiver 1 PPS or IRIG input is used to discipline the local oscillator and cancel out any oscillator drift or aging. Precision UTC timestamps and GPS location/time/status are all made available via PCIe registers to the host CPU/application. Time trigger output and time event interrupts synchronized to GPS UTC are available under host control. GPS location/time/status data Broadcast/Unicast output via backplane Ethernet with selectable bonding/failover behaviour.

The board can demodulate IRIG Amplitude Modulated (AM) signals and receive/transmit IRIG DC Level Shift (DCLS) signals. The disciplined clock, 1 PPS, divided-down clocks, IRIG DCLS, and time trigger may be output in any combination to the TCLKA/TCLKB/TCLKC/TCLKD backplane channels.

The board acts as a Grand-Master Clock/Clock Bridge between GPS/PTP (1588)/IRIG/NTP to provide enhanced flexibility to your system design. The board also supports Synchronous Ethernet (SyncE) to eliminate clock drift at the Ethernet PHY level.

A back-up battery or SuperCap provides non-volatile storage of the Almanac, Ephemeris, and Last position data to enable rapid “warm start” re-acquisition, usually within 35 seconds. The module’s console is available via front serial or SSH via Ethernet. Locking/holdover status is also available via IPMI sensors. A secondary serial port enables GPS NMEA data in/out.

See DAQ Series for Data Acquisition software supporting this product. Also see Synchronised DAQ for a description of how phase coherent acquisition can be achieved using this product.

 

Key Features
  • GPS/PTP(1588)/IRIG/NTP Grand Master Clock
  • Synchronous Ethernet
  • Three arbitrary frequency disciplined clocks
  • Onboard GPS receiver
  • IRIG AM decoder input / IRIG DCLS input/output
  • AMC.1 Dual PCIe Gen2 x4 or AMC.2 Dual 10GbE
  • AMC.2 Dual 1000Base-X (one can mux to front RJ-45)
  • 100ns precision UTC timestamps, system status and GPS positions via PCIe
  • TSIP data Broadcast/Multicast/Unicast via Ethernet w/ bonding/failover
  • GPS NMEA serial port 
  • Battery or SuperCap Almanac/Ephemeris/Last position backup
  • 1 PPS PCIe interrupt, time events, time trigger for overall system/software synchronization
  • Holds over clocks/1PPS  using OCXO
Benefits
  • Complete GPS/PTP (1588)/IRIG/NTP solution
  • Flexible allocation to backplane clock signals
  • Grand-Master Clock/Clock Bridge capability
  • Electrical, mechanical, software, and system-levelexpertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC723

Xeon E3-1125 Processor AMC, Fabric Mix

  • Processor AMC with Intel® Core i
    • with Cave Creek PCH
  • Single module, mid size per AMC.0
    • (option for full size)
  • PCIe x4 on ports 4-7 (AMC.1)
  • 10GbE XAUI on ports 8-11 (AMC.2)
  • GbE to port 0 and 1 (AMC.2)
  • SATA to port 2 and 3 (AMC.3)
  • Dual GbE to the front panel
  • Up to 16GB of DDR3 memory with ECC
  • Option for up to 32GBytes of Flash
  • Serial over LAN
  • IPMI 2.0 compliant
View product AMC723 Data Sheet

UTC004

3rd Gen MicroTCA Carrier Hub (MCH), 40GbE/PCIe Gen 3

 

  • Unified 1GHz quad-core CPU for MCMC (MicroTCA Carrier Management Controller), Shelf Manager, Clocking, and Fabric management
  • Automatic fail-over with redundant UTC004s
  • 1GbE base switch with dual 100/1000/10G uplink
  • Full Layer 3 managed Ethernet switches
  • Non-blocking PCIe Gen 3, SRIO Gen 2, 10GbE/40GbE, or Crossbar Switch option to AMC fat pipes with options for up to 40GbE uplink
  • Low-jitter M-LVDS clock distribution crossbar matrix
  • PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588
  • Single module, full size per AMC.0
View product UTC004 Data Sheet

VT814

2U MTCA.4 Chassis with 6 AMC Slots

  • MicroTCA rack mount or desktop chassis platform, 19” x 2U x 14.2” deep
  • Compliant to MTCA.4 specifications with rear IO for High-Energy Physics and other applications
  • Supports up to six MTCA.4 mid-size, double module AMCs and RTMs
  • Right-to-left cooling
  • Single MicroTCA Carrier Hub (MCH) and flexible Power Module options. Full integration is also available.
  • Routing on 26-layer passive backplane using high-speed 12.5 GHz MTCA connectors
  • Single/dual 500W AC or single/dual 796W DC power standard, other options available
  • Removable Air Filter, Power Modules, and Fan Tray
  • Right-to-left cooling
View product VT814 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.