AMC596

FPGA Virtex UltraScale™ XCVU440 with P2040 and PinoutPlus™

  • Single module, mid-size AMC (full-size optional)
  • Xilinx Ultra Scale XCVU440 w/ QorIQ PPC2040
  • 8 GB of DDR4 (single bank of 64-bits)
  • 20 SERDES lanes optionally routed to Tongue 2 for high-bandwidth connectivity to neighboring slot
  • Ideal for ASIC prototyping/emulation
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 10GbE/40GbE, etc. are FPGA programmable)
  • AMC Ports 12-15 and 17-20 are routed to the FPGA
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed

Download Datasheet Add to Info Request

add to compare
0

The AMC596 is based on the Virtex UltraScale™ XCVU440 FPGA in FLGA2892 package withan onboard Power PC P2040. The AMC596 is compliant to the AMC.1, AMC.2, AMC.3 and/orAMC.4 specification.

The module provides 20 SERDES lanes on tongue 2, providing high-bandwidth connectivity toanother module at a very high speed (where supported by appropriate chassis). The use of thetongue 2 connector complies with the AMC.0 specification.

The on-board, re-configurable FPGA interfaces to the AMC FCLKA and TCLKA-D via a MLVDSCross Bar Switch (CBS). The FPGA has interface to one DDR4, 64-bit wide, with 8 GB totalmemory. This allows for large buffer sizes to be stored during processing as well as for queuingthe data to the host.

The on-board quad core P2040 runs at 1.2 GHz with 1 GB of DDR3, 128 MB of Boot Flash, anda 32 GB SD Card. The PPC has x4 PCIe interface to the FPGA in addition to its local bus. ThePPC has its dual GbE routed to ports 0 and 1 of the AMC via a mux to allow FPGA routing tothe ports as well. The same applies to ports 2-3 (PPC SATA ports or directly to the FPGA viamux selection).

Key Features
  • Single module, mid-size AMC (full-size optional)
  • Xilinx Ultra Scale XCVU440 w/ QorIQ PPC2040
  • 8 GB of DDR4 (single bank of 64-bits)
  • 20 SERDES lanes optionally routed to Tongue 2 for high-bandwidth connectivity to neighboring slot
  • Ideal for ASIC prototyping/emulation
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 10GbE/40GbE, etc. are FPGA programmable)
  • AMC Ports 12-15 and 17-20 are routed to the FPGA
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
Benefits
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC751

Xeon E5 Processor AMC, 40 GbE, PinoutPlus™

  • Intel® Xeon E5-2648Lv4 (Haswell-EP)
  • x16 PCIe Gen 3 via Tongue 2
    • optional PCIe to ports 12-15, 17-20
  • 40GbE or 10GbE on ports 4-7 and 8-11
  • Video output via DVI-I connector
  • GbE to port 0 and 1, SATA to port 2 and 3 (AMC.3)
  • Dual GbE to the front panel
  • Four banks of DDR4 memory with ECC
  • Double module, full-size per AMC.0
  • Optional TPM (Trusted Platform Module)
  • Serial over LAN
  • IPMI 2.0 compliant
View product AMC751 Data Sheet

UTC020

DC Power Module, 936W

  • Single module, full-size per AMC.0
  • Dual -36V DC to -75V DC input, 936W (available in 468W)
  • Hot swappable with support for power module redundancy
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
View product UTC020 Data Sheet

VT899

7U uTCA Cube Chassis, 6 AMC

  • 7U μTCA Cube
  • 5” x 7U x 9” deep (with handles 10” deep)
  • Redundant Cooling Units
  • Up to six AMCs: 6 full size single module or 3 full size double module
  • Radial I2C bus to each AMC
  • Single Star passive 26 layer backplane
  • Redundant FRU information devices and carrier locator
  • Telco Alarm
  • CLK1, CLK2 and CLK3
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front
View product VT899 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.