AMC595

Virtex-7 UltraScale™ XCVU440 FPGA Carrier for FMC with P2040

  • Single module, mid-size AMC (full-size optional)
  • Xilinx Ultra Scale XCVU440 w/ QorIQ PPC2040
  • 8 GB of DDR-4 (single bank 64-bit))
  • FMC support (with special connector)
  • Ideal for ASIC prototyping/emulation and 100G transponder/muxponder
  • AMC Ports 4-11 are routed to FPGA per AMC.1,AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 10GbE/40GbE, etc. are FPGA programmable)
  • AMC Ports 12-15 and 17-20 are routed to the FPGA
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed

Download Datasheet Add to Info Request

add to compare

The AMC595 is based on the Virtex UltraScale™ XCVU440 FPGA in FLGA2892 package with an onboard Power PC PC2040. The unit is compliant to the AMC.1, AMC.2, AMC.3 and/or AMC.4 specification.

The module allows an FMC module to be mated. However, the FMC module must NOT use the standard height connector and must have the mated height of 17.5mm (SamTec part number SEAM-40-11.0-L (or S)-10-2-A on the FMC module, the standard FMC connector is SEAM-40-03.5-L (or S)-10-2-A). VadaTech will deliver any of its FMC modules that mate to the AMC595 with the modified connector height. Contact Sales for the ordering option.

The onboard, re-configurable FPGA interfaces directly to the AMC FCLKA and TCLKA-D via a Cross Bar MLVDS (CBS). It also has interface to one bank of DDR4, 64-bit wide, with 8 GB total memory. This allows for large buffer sizes to be stored during processing as well as for queuing the data to the host.

The onboard quad core P2040 runs at 1.2 GHz with 1 GB of DDR3, 128 MB of Boot Flash, and a 32 GB SD Card. This PPC has x4 PCIe to the FPGA in addition to its local bus. Dual GbE is routed to Ports 0 and 1 of the AMC via a mux to allow FPGA routing to the ports. This also applies to Ports 2-3 (PPC SATA ports or directly to the FPGA via mux selection).

 

Key Features
  • Single module, mid-size AMC (full-size optional)
  • Xilinx Ultra Scale XCVU440 w/ QorIQ PPC2040
  • 8 GB of DDR-4 (single bank 64-bit))
  • FMC support (with special connector)
  • Ideal for ASIC prototyping/emulation and 100G transponder/muxponder
  • AMC Ports 4-11 are routed to FPGA per AMC.1,AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 10GbE/40GbE, etc. are FPGA programmable)
  • AMC Ports 12-15 and 17-20 are routed to the FPGA
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
Benefits
  • Xilinx Virtex-7 XCVU440 FPGA in FLGA2892 package
  • Single Bank of 64-bit wide DDR4 memory allows larger buffer sizes while processing and queuing data to the host
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

FMC223

FMC High-speed DAC 14-bit at 2.5 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Single module  AD9739 DAC 14-bit at 2.5 GSPS
  • 2 Vpp differential Analog output swing
  • Programmable DSP clock
  • Dynamic performance
    • 8 QAM carriers @ 400 MHz IF –71 dBc
    • 16 QAM carriers @ 400 MHz IF –68 dBc
    • 32 QAM carriers @ 400 MHz IF –65 dBc
    • 72 QAM carriers @ 600 MHz IF –61 dBc
  • Single tone NSD @ 2.4 GSPS
    • 166 dBm/Hz @ 100 MHz IF
    • 162 dBm/Hz @ 1 GHz IF
  • Connection via MMCX for Analog Out and Reference Clock Input
  • Connection via LVDS for TRIG In/Out and GPIO
  • RoHS compliant
View product FMC223 Data Sheet

UTC020

DC Power Module, 936W

  • Single module, full-size per AMC.0
  • Dual -36V DC to -75V DC input, 936W (available in 468W)
  • Hot swappable with support for power module redundancy
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
View product UTC020 Data Sheet

VT899

7U uTCA Cube Chassis, 6 AMC

  • 7U μTCA Cube
  • 5” x 7U x 9” deep (with handles 10” deep)
  • Redundant Cooling Units
  • Up to six AMCs: 6 full size single module or 3 full size double module
  • Radial I2C bus to each AMC
  • Single Star passive 26 layer backplane
  • Redundant FRU information devices and carrier locator
  • Telco Alarm
  • CLK1, CLK2 and CLK3
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front
View product VT899 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.