DAQ523

MTCA.4 Data Acquisition Sub-system, 12-Channel 16-bit, 125 MSPS

  • Complete Data Acquisition sub-system
  • Supported by DAQ Series™ data acquisition software
  • Twelve channel ADC 16-bit @ 125 MSPS using AD9653
  • Dual DAC 16-bit @ 250 MSPS using MAX5878
  • Xilinx Kintex-7 FPGA XC7K410T with 2 GB of DDR3 memory
  • Double module, mid-size (full-size optional) AMC and RTM, compliant to μTCA.4
  • Internal or external clock, Trig in/out configurable by software

Download Datasheet Add to Info Request

add to compare

The DAQ523 is a digitizer sub-system in MTCA.4 form factor, comprising an FPGA AMC, an ADC rear transition module, and full software/firmware complete with DMA engine and EPICS support. The equipment can be operated from a simple user-level API, via a development API, or via EPICS. The user interface is consistent with other VadaTech data acquisition products.

The high sample rate, 16-bit digitisation and MTCA.4 form factor make this sub-system ideal for research and industrial applications. The dual channel DAC, driven from the onboard Kintex FPGA, can be used to implement low-latency feedback for HWIL (hardware in the loop) test applications.

An RS-232 port is also available from the FPGA if the customer desires to implement a soft-processorin the FPGA and utilize a serial console, and quad SFP+ ports are available on the front panel (these require user firmware development).

The MRT523 is capable of accepting user-designed mezzanine modules for sensor inputdirect to the chassis. This allows users to match the analog front end to specific projectrequirements. Contact VadaTech sales for details.

Key Features
  • Complete Data Acquisition sub-system
  • Supported by DAQ Series™ data acquisition software
  • Twelve channel ADC 16-bit @ 125 MSPS using AD9653
  • Dual DAC 16-bit @ 250 MSPS using MAX5878
  • Xilinx Kintex-7 FPGA XC7K410T with 2 GB of DDR3 memory
  • Double module, mid-size (full-size optional) AMC and RTM, compliant to μTCA.4
  • Internal or external clock, Trig in/out configurable by software
Benefits
  • Complete integrated solution with EPICS support and example GUI
  • High performance ADC/DAC sub-system with Kintex-7 FPGA
  • Comprehensive driver support
  • Customizable analog front end
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Block diagram

Related Products

AMC725

Xeon E3 Processor, 10GbE, MTCA.4, Double Module, AMC

  • Double-module, mid-size per AMC.0 and MTCA.4
  • Intel® Xeon E3 processor options with PCH
  • DVI graphics (SM750 w/ 16 MB DDR) up to 1920x1440 resolution
  • PCIe Gen3 on ports 4-7 and 8-11 or single PCIe x8 on ports 4-11 (AMC.1)
  • GbE on ports 0 and 1 (AMC.2) and SATA on ports 2 and 3 (AMC.3)
  • PCIe Gen3 x8, dual SATA and quad USB to RTM
  • Dual 10GbE via SPF+ and dual GbE via RJ-45 to front panel
View product AMC725 Data Sheet

CM045

μTCA.4 Kintex-7 Data Processing AMC (TCK7)

  • Data Processing AMC in double module, mid-size (full-size optional)
  • Compliant to MicroTCA.4
  • Class D1.2 compatible
  • High-speed Kintex-7 FPGA
  • 16 GB DDR3 SDRAM
  • Octal SFP+ via the front panel
  • PCIe x4 Gen 3
  • Two channels of GbE
  • Ten direct low latency connections to backplane
  • Four low latency connections to RTM
  • LVDS parallel bus to RTM
  • Partial reconfiguration and firmware upgrade support
  • Advanced diagnostic, monitoring and debugging
View product CM045 Data Sheet

VT811

8U uTCA.4 Chassis Platform

  • uTCA.4 Chassis Platform with rear I/O
  • 19” x 8U x 14.9” deep (with handles 16.23” deep)
  • Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and quad Power Modules
  • Up to twelve AMCs: 12 mid-size double module front module with 12 mid-size double module RTMs
  • Provision to route cables from the front to the back
  • Radial I2C bus to each AMC
  • High-speed 30 layer passive backplane
  • Redundant FRU information devices and carrier locator
  • Dual 1000W AC Power supply option Telco Alarm FCLKA, TCKA, TCKB, TCLKC AND TCLKD
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front
View product VT811 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.