AMC Load Module

  • Single module, mid size or full size
  • 32-bit IPMI RISC processor
  • Up to 90W adjustable power load
  • True payload power request to the carrier (MCH/Shelf)
  • Front panel LED to indicate status and power consumption
  • Six temp sensors to monitor various on-board temperatures
  • All differential pairs routed for ease of access (loop back using zero ohms resistors)
  • IPMI 2.0 compliant
  • RoHS compliant

Download Datasheet Add to Info Request

add to compare
0

The AMC001 provides an easy way to test/monitor AMC slots under different power loading conditions. The module includes two front panel switches for configuration. The rotary switch is read during power up by the on-board IPMI controller, which uses the setting to request the specified amount of power needed during test and verification from the carrier (MCH/Shelf). A second switch is used to increase or decrease the actual power consumption of the board at any time during the test. The indicators on the front panel allow for effortless monitoring of the power being used. There is a temperature sensor on the air flow intake side and five others at the air flow exit side to continually monitor the air temperature. The module has a serial port in the front that allows a more dynamic configuration of the load using predefined profiles selected from a menu driven interface.

Key Features
  • Single module, mid size or full size
  • 32-bit IPMI RISC processor
  • Up to 90W adjustable power load
  • True payload power request to the carrier (MCH/Shelf)
  • Front panel LED to indicate status and power consumption
  • Six temp sensors to monitor various on-board temperatures
  • All differential pairs routed for ease of access (loop back using zero ohms resistors)
  • IPMI 2.0 compliant
  • RoHS compliant
Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC610

AMC 4 Port Gigabit Ethernet with 2.5” Disk

  • AMC.1 and AMC.3
  • Single-width, mid size (option for full size)
  • 4 Gigabit Ethernet ports via RJ-45
  • On board 2.5” disk with direct connect toPorts 2 and 3
  • PCIe Gen2 x4 lanes to Ports 4-7
  • IPMI 2.0 compliant
  • RoHS compliant
  • OS support for:
    • Linux
    • Windows
    • Solaris
    • VxWorks
View product AMC610 Data Sheet

UTC002

MicroTCA Carrier Hub, 2nd Generation

  • 400 MHz CPU with 64 MB DDR for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
  • Layer 2 managed GbE to each AMC (optional)
  • Non-blocking PCIe Gen 3 (x4), to each slot with option for SRIO or 10GbE (Layer 2 managed)
  • Redundant boot system to ensure fail-safe upgrades
  • Automatic fail-over with dual UTC002
  • SAS/SATA to each AMC (optional)
  • Telecom/GPS clock (Stratum-3)
  • Fabric clock with spread spectrum capability
  • Single module, full size per AMC.0
  • HPM.1 and IPMI 2.0 compliant
View product UTC002 Data Sheet

UTC010

MicroTCA DC Power Module, 792W

  • Dual -36VDC to -75VDC input,
  • 792W (available in 396W)
  • Hot swappable with support for power module redundancy
  • Available in MTCA.3 Conduction Cooled version
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Modules can be turned on without an MCH in the system
  • External as well as internal WDT
View product UTC010 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.