AMC Telco/Fabric Clock Breakout

  • Single module, compact size (mid or full size option)
  • AMC v1 and AMC v2 clocking compliant
  • Selectable CLK1/TCLKA/TCLKC via SMB connector as input
  • Selectable CLK2/TCLKB/TCLKD via SMB connector as input
  • Selectable CLK1/TCLKA/TCLKC via SMB connector as output
  • Selectable CLK2/TCLKB/TCLKD via SMB connector as output
  • CLK3 (M-LVDS) or FCLKA (HCSL) option via SMB connector as output
  • Front panel clock transceiver enable switches
  • IPMI 2.0 compliant
  • HPM.1
  • RoHS compliant

Download Datasheet Add to Info Request

add to compare
0

The AMC002 provides a convenient way to monitor and/or inject Telco clocks with a μTCA/ATCA system utilizing either AMC v1 or AMC v2 clock pin-out definitions. Two clocks may be injected while at the same time three clocks may be monitored. The clocks in use for both input and output are selectable by on-board switches. Clock signals are automatically converted between M-LVDS backplane signaling and front panel +3.3V LVCMOS signaling.

An option is provided for monitoring the fabric (i.e. PCIe) clock using HCSL signaling under AMC v2 or CLK3 using M-LVDS signaling under AMC v1. Clocks are conditionally driven to the backplane based on front panel clock transmit enable switches. Indicators on the front panel clearly show the current clocking configuration of the board.

Key Features
  • Single module, compact size (mid or full size option)
  • AMC v1 and AMC v2 clocking compliant
  • Selectable CLK1/TCLKA/TCLKC via SMB connector as input
  • Selectable CLK2/TCLKB/TCLKD via SMB connector as input
  • Selectable CLK1/TCLKA/TCLKC via SMB connector as output
  • Selectable CLK2/TCLKB/TCLKD via SMB connector as output
  • CLK3 (M-LVDS) or FCLKA (HCSL) option via SMB connector as output
  • Front panel clock transceiver enable switches
  • IPMI 2.0 compliant
  • HPM.1
  • RoHS compliant
Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC610

AMC 4 Port Gigabit Ethernet with 2.5” Disk

  • AMC.1 and AMC.3
  • Single-width, mid size (option for full size)
  • 4 Gigabit Ethernet ports via RJ-45
  • On board 2.5” disk with direct connect toPorts 2 and 3
  • PCIe Gen2 x4 lanes to Ports 4-7
  • IPMI 2.0 compliant
  • RoHS compliant
  • OS support for:
    • Linux
    • Windows
    • Solaris
    • VxWorks
View product AMC610 Data Sheet

UTC002

MicroTCA Carrier Hub, 2nd Generation

  • 400 MHz CPU with 64 MB DDR for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
  • Layer 2 managed GbE to each AMC (optional)
  • Non-blocking PCIe Gen 3 (x4), to each slot with option for SRIO or 10GbE (Layer 2 managed)
  • Redundant boot system to ensure fail-safe upgrades
  • Automatic fail-over with dual UTC002
  • SAS/SATA to each AMC (optional)
  • Telecom/GPS clock (Stratum-3)
  • Fabric clock with spread spectrum capability
  • Single module, full size per AMC.0
  • HPM.1 and IPMI 2.0 compliant
View product UTC002 Data Sheet

UTC010

MicroTCA DC Power Module, 792W

  • Dual -36VDC to -75VDC input,
  • 792W (available in 396W)
  • Hot swappable with support for power module redundancy
  • Available in MTCA.3 Conduction Cooled version
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Modules can be turned on without an MCH in the system
  • External as well as internal WDT
View product UTC010 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.