One Slot 3U VPX Benchtop Development Chassis with RTM (P0 to P2 installed)

  • One slot benchtop 3U VPX development platform
  • P0 to P2 connectors are installed
  • Variable fan speed control for front and rear
  • Removable panels for ease of access for probing
  • Support for Rear Transition Modules (RTMs)
  • Allows for a shelf manager to do health monitoring
  • JTAG connector
  • User setting of SYSRESET, NVMRO, etc.
  • Onboard battery pack to provide the VBAT
  • Vertical or Horizontal positioning on bench

Download Datasheet Add to Info Request

add to compare

The VTX980 is a single slot 3U VPX chassis for board bring-up and testing of 3U VPX modules. The chassis can accept a front and a rear module (5 HP or 10 HP). The panels on both the front and rear slots are removable for ease of probing and debugging.

The VTX980 can be placed on bench in both horizontal and vertical positioning for ease of access.

Power Supply

The VTX980 Universal AC power supply provides 750W to the chassis. The chassis supplies all the necessary power (+12V, -12V, +5V, etc.) to the module in accordance with VITA 46 specifications.The unit also comes with a battery pack which provides the VBAT to the module. The power to VBAT can be switched between the onboard battery pack and the power supply. A sense resistor is fitted to each rail so that a voltmeter can measure power consumption.

Cooling

Variable speed fans provide front and rear cooling to the module.

Backplane

The backplane provides all the necessary VITA 46 signals set by the user (NVMRO, SYSRESET, SYS_CON, driver the dual clock, etc.). All the connectors are installed P0 thru P6 and are routed from the front to the rear.

Health Monitoring

The dual IPMI bus is routed to an external VT007 bench-top shelf manager that monitors the VPX board sensors in compliance to VITA 46.11. The VT007 supports Tier 2 Health Management and can be ordered separately or as an option with VTX980..

JTAG

The backplane breaks-out the JTAG signals via a header connector to enable external connection of a JTAG probe.

Key Features
  • One slot benchtop 3U VPX development platform
  • P0 to P2 connectors are installed
  • Variable fan speed control for front and rear
  • Removable panels for ease of access for probing
  • Support for Rear Transition Modules (RTMs)
  • Allows for a shelf manager to do health monitoring
  • JTAG connector
  • User setting of SYSRESET, NVMRO, etc.
  • Onboard battery pack to provide the VBAT
  • Vertical or Horizontal positioning on bench
Benefits
  • Optional shelf manager supporting Tier 2 Health Management
  • 750W AC Power supply
  • Ease of access to board under development
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications Related Products

VPX551

Dual Kintex UltraScale™, 6U VPX

  • Dual Kintex UltraScale™ XCKU115
  • 16 GB of 64-bit wide DDR4 Memory to each FPGA
  • Rear fibre I/O via VITA 66.5
  • Front fibre via SFP+
  • Health Management through dedicated Processor
View product VPX551 Data Sheet

VPX645

NVMe HBA with RAID (0, 1, 5, 6, 10, 50 and 60), 3U VPX

  • 3U VPX NVMe Host Bus Adapter with Full support for RAID
  • Dual Core ARM A15 RAID On Chip (ROC)
  • Onboard 8 GB of DDR4 Memory with ECC
  • Hardware Engine for RAID 5 and RAID 6 acceleration
  • PCIe Gen3 x8 or x4
  • Health Management through dedicated Processor
View product VPX645 Data Sheet

VPX752

Intel® Xeon™ SoC, PCIe Gen3 and 10GbE (XAUI), 6U VPX

  • 6U VPX module Intel 5th Generation Xeon-D SoC
  • PCIe Gen3 x16 (dual x8 or quad x4)
  • Quad 10GbE XAUI
  • Front-panel video out via DP with dual USB3.0
  • Dual front panel 100/1000/10G Ports
  • Single XMC site with I/O expansion going to P5/P6
  • Dual isolated RS-422/485 and a single RS-232 port
  • Health Management through dedicated Processor
View product VPX752 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.