HDMI Sink/DisplayPort Source with USB 3.0 and QSFP28

  • HDMI Sink
  • Display port Source
  • USB 3.0 Type C
  • QSFP28
  • Onboard Wideband PLL to set up any clock frequency

Download Datasheet Add to Info Request

add to compare
0

The FMC114 is an FPGA Mezzanine Card (FMC) per VITA 57.1 standard. HMDI source, DisplayPort sink, USB +3.0, and a QSFP+ port are all incorporated within the unit’s small footprint.

The HDMI sink has a 6 GSPS Clock Data Recovery (CDR). The input supports 4K2K60FPS and up to WUXGA 16-bit color depth or 1080p with higher refresh rate.

The DisplayPort sink has a DP1.4a repeater on the front end that supports rates of up to 8.1 Gbps.  The module brings in the AUX Channels of the DP.

The QSFP28 has a multi-rate re-timer and Signal Conditioning on the front end. Each channel locks independently up to 28.4 Gbps with an adaptive Decision Feedback Equalizer (DFE).

The FMC114 has a low jitter PLL (jitter performance

Key Features
  • HDMI Sink
  • Display port Source
  • USB 3.0 Type C
  • QSFP28
  • Onboard Wideband PLL to set up any clock frequency
Benefits
  • Single module to provide multiple I/O
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC585

Zynq UltraScale+ FPGA, FMC+ Carrier, AMC

  • Xilinx UltraScale+ XCZU19EG FPGA
  • Single FMC+ (VITA 57.4) site
  • 8 GB of 64-bit wide DDR4 Memory (single bank) with ECC (CPU)
  • 8 GB of 64-bit wide DDR4 Memory (single bank, FPGA)
  • MPSoC with block RAM and UltraRAM
  • SD Card (option)
  • 128 MB of boot Flash
  • 64 GB of user Flash
View product AMC585 Data Sheet

FMC214

70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • On-board clocking with multi-card synchronization capability
  • Low Pin Count (LPC) 160-pin connector
View product FMC214 Data Sheet

VPX592

FPGA/FMC Carrier, Kintex UltraScaleā„¢, 3U VPX

  • 3U FPGA carrier for FPGA Mezzanine Card (FMC) per VITA 46 and VITA 57
  • Xilinx Kintex UltraScale™  XCKU115 FPGA
  • High-performance clock jitter cleaner
  • VHDL reference design with source code
  • Protocols such as PCIe, SRIO, 10GbE/40GbE, etc. are FPGA programmable
  • Compatible with VadaTech and 3rd party FMCs
  • 20 GB of DDR4 Memory (2 banks of 64-bit wide, and single bank of 32-bit wide)
  • Health Management through dedicated Processor
View product VPX592 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.