Whether it’s a standard module- or chassis-level products, or we’re collaborating with you on a complete integrated platform, our validation and test methodology is rigorous and has been refined over many years.
VadaTech recognizes that customers are looking for solutions that meet their specific requirements, and that such solutions are not always achievable using existing modular products.
The AMC001 provides an easy way to test/monitor AMC slots under different power loading conditions. The module includes two front panel switches for configuration. The rotary switch is read during [...]
The AMC002 provides a convenient way to monitor and/or inject Telco clocks with a μTCA/ATCA system utilizing either AMC v1 or AMC v2 clock pin-out definitions. Two clocks may be [...]
The AMC003 provides an accurate local clock frequency to a μTCA/ATCA system which is derived from a GPS 1PPS signal. The local oscillator is disciplined to provide the desired clock [...]
The AMC004 provides a complete GPS bus-level timing solution to a MTCA/ATCA system. The onboard GPS receiver is used to discipline the local oscillator and cancel out any oscillator drift [...]
The AMC005 provides a complete, feature-rich, GPS/PTP (1588)/IRIG/NTP bus-level timing solution to a MTCA/ATCA system, with exceptional flexibility. The onboard GPS receiver 1 PPS or IRIG input is used to [...]
The AMC006 provides a complete, feature-rich, GPS/PTP (1588)/IRIG/NTP bus-level timing solution to a MTCA/ATCA system, with exceptional flexibility. The onboard GPS receiver, or 1PPS, or Inter-Range Instrumentation Group (IRIG) input, [...]
The AMC011 provides an easy way to test/monitor AMC slots under different power loading conditions. The module includes two front panel switches for configuration. The rotary switch is read during [...]
The AMC012 provides an easy way to test/monitor airflow in five zones. An LCD display on the front panel allow for effortless monitoring of the airflow. There are four temperature [...]
The AMC013 provides an easy way to connect to the FMC155 module to provide expansion of the I/O. The module provides Isolated RS-485, Ten Isolated Output, Ten Isolated Input and [...]
The AMC014 is designed to providing frequency matched triggering signals as dual LVDS output. The AMC014 trigger response can be configured via the front panel RS232 interface or a trig [...]
The AMC015 is the third generation IPMI controller that meet all of the requirements for an AMC MMC and ATCA Carrier Manager as laid out in the industry standards from [...]
The AMC080 is high density versatile I/O module. The 15 banks of 8-bit I/O can be used as input and or/output and are configurable to run as +3.3V or +5V. [...]