Description
The MRT523 is a Rear Transition Module (RTM) for VadaTech’s AMC523. The MRT523 accepts a mezzanine card (sold separately) to provide the ADC, DAC and Clock I/Os.
The MRT523 provides three quad channel ADCs (AD9653) on board to provide a total of 12 channels ADC 16-bit @ 125 MSPS. The ADC accept input voltage of +/–1V DC coupled, 100 Ohm load. There are also dual DAC outputs with routing to the AMC523 where the DAC ICs reside. The ADCs, DAC and Clocks signals to the mezzanine are provided through five 20-pin ZIF connectors onboard the MRT523.
Refer to the mezzanine card datasheets (MZ523x for VadaTech versions) for available I/O channels and signal conditioning options. If you are using a custom or third-party mezzanine, ensure that the analog inputs are within +/–1V.
VadaTech offers a wide range of MicroTCA.4 products, including full systems. Contact your local salesperson or representative for details.
VIDEO: AD9653 – based Data Acquisition from VadaTech: This video provides a hardware and software description of the standard modules AMC523 and MRT523 integrating three quad-channel AD9653 from Analog Devices with Xilinx FPGA Kintex-7. The video includes a demonstration of the VadaTech DAQ Series™ BSP with embedded DMA engine, real time data display and memory buffer occupancy. In this video we also demonstrate the capability setup the acquisition parameters and include Simulink blocks into the FPGA design.
VIDEO: EPICS – based Data Acquistion for Physics Research from VadaTech: This video shows how VadaTech DAQ Series™ including EPICS driver accelerates the integration of digitizer/converters in EPICS-based facilities.
VIDEO: Vadatech ADI Offerings: This video introduces the advantages of using VadaTech to build your new products embedding Analog Devices digitizer and converters.
