ART340

Ten Fiber Video with Five Fiber USB 2.0

  • ATCA Rear Transition standard form factor
  • PICMG 3.1 compliant
  • Ten Fiber Video interface
    • no compression is done during the conversion
  • Five USB 2.0 fiber
  • OS support for:
    • OS independent

Download Datasheet Add to Info Request

add to compare
0

The ART340 provides Ten Video outputs via single strand of fiber SC style per each of the Video channels that are coming from the zone three. The ART340 module converts and transmits an uncompress DVI video signal over 300 Meter cable.

The module has USB 2.0 Fiber interface. The ART340 USB fiber media converter extends the range of the USB beyond the standard USB 5 meter limit to over 300 Meter.

The IPMI management is utilizing VadaTech’s second generation IPMI management controller. 

Key Features
  • ATCA Rear Transition standard form factor
  • PICMG 3.1 compliant
  • Ten Fiber Video interface
    • no compression is done during the conversion
  • Five USB 2.0 fiber
  • OS support for:
    • OS independent
Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

ATC800

48-Port GbE with 10-GbE Uplink Switch

  • AdvancedTCA open standard form factor
  • Linux operating system
  • Open Architect™ firmware 
  • Run as the Shelf Manager or Node board
  • Five front panel 10/100/1000Base-T ports
  • Nine front panel SFP ports
  • Front panel XFP egress port for 10GbE
  • GbE to Base Interface for 14 payload slots and Shelf Manager
  • Eighteen GbE ports to Zone 3 for use with an RTM
  • 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
  • PICMG 3.1 compliant
  • IEEE 802.3 compliant
  • IPMI Version 2.0 compliant
View product ATC800 Data Sheet

ATC808

Low Cost 26 Port ATCA Switch

  • AdvancedTCA open standard form factor
  • PICMG 3.1 compliant
  • Managed Layer 2 switch
  • GbE to Base Interface for 15 Node slots
    • plus two Shelf
  • One port to the update channel
  • Eight front panel SFP connectors for mix of Copper and Fiber interfaces
  • Support up to 8K MAC address
  • 4K IEEE 802.1Q VLANs
  • VLAN-based packet filtering
  • Packet classification using IEEE802.1p QoS
  • 9K Jumbo frames
  • Spanning tree, Mirroring, QoS
  • SNMP and RMON
  • OS support for:
    • OS independent
View product ATC808 Data Sheet

VT830

6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers

  • 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
  • 10GbE/GbE Managed Layer 2
  • 40GbE/10GbE/GbE Managed Layer 3
  • 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
  • Split power distribution (odd slots on A1/B1,even slots on A2/B2)
  • Redundant Power supplies AC (DC or AC/DC optional)
  • Up to four AC supply at 1300W each (N+1)
  • 6 Rear Transition Module (RTM) slots
View product VT830 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.