ATCA Rear Transition Module

  • PCIe expansion via rear panel 
    • Provides expansion to anotherATC103/104/105/106/107/108/109,AMC103 or PCI103 board
  • One 10/100Mbit Ethernet port
  • Management controller serial port
  • Two 10/100/1000 GbE Ports 
  • High-density connector for one of the PMCuser defined I/Os
  • RoHS compliant

Download Datasheet Add to Info Request

add to compare
0

The ART103 is a Rear Transition Module (RTM) that brings expandability to Vadatech’s ATC103 carrier board. The ART103 is a passive RTM that allows for the additional connectivity of two GbE ports, Management 10/100Mbit Ethernet, Management RS-232 serial interface and three PCIe x4 lanes for expansion. One of the PMC J4s (user defined I/O) is routed to the back.

The ART103 can seamlessly be connected to an additional ART103, ATC103/104/105/106/107/108/109, AMC103 or PCI103 modules to increase the number of I/O slots via a PCIe fiber or copper expansion interconnect.

Key Features
  • PCIe expansion via rear panel 
    • Provides expansion to anotherATC103/104/105/106/107/108/109,AMC103 or PCI103 board
  • One 10/100Mbit Ethernet port
  • Management controller serial port
  • Two 10/100/1000 GbE Ports 
  • High-density connector for one of the PMCuser defined I/Os
  • RoHS compliant
Benefits
  • Full front ATCA board and compatible RTM solution available from VadaTech
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level
     expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

ATC800

48-Port GbE with 10-GbE Uplink Switch

  • AdvancedTCA open standard form factor
  • Linux operating system
  • Open Architect™ firmware 
  • Run as the Shelf Manager or Node board
  • Five front panel 10/100/1000Base-T ports
  • Nine front panel SFP ports
  • Front panel XFP egress port for 10GbE
  • GbE to Base Interface for 14 payload slots and Shelf Manager
  • Eighteen GbE ports to Zone 3 for use with an RTM
  • 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
  • PICMG 3.1 compliant
  • IEEE 802.3 compliant
  • IPMI Version 2.0 compliant
View product ATC800 Data Sheet

ATC808

Low Cost 26 Port ATCA Switch

  • AdvancedTCA open standard form factor
  • PICMG 3.1 compliant
  • Managed Layer 2 switch
  • GbE to Base Interface for 15 Node slots
    • plus two Shelf
  • One port to the update channel
  • Eight front panel SFP connectors for mix of Copper and Fiber interfaces
  • Support up to 8K MAC address
  • 4K IEEE 802.1Q VLANs
  • VLAN-based packet filtering
  • Packet classification using IEEE802.1p QoS
  • 9K Jumbo frames
  • Spanning tree, Mirroring, QoS
  • SNMP and RMON
  • OS support for:
    • OS independent
View product ATC808 Data Sheet

VT830

6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers

  • 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
  • 10GbE/GbE Managed Layer 2
  • 40GbE/10GbE/GbE Managed Layer 3
  • 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
  • Split power distribution (odd slots on A1/B1,even slots on A2/B2)
  • Redundant Power supplies AC (DC or AC/DC optional)
  • Up to four AC supply at 1300W each (N+1)
  • 6 Rear Transition Module (RTM) slots
View product VT830 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.