ATCA Carrier for VMEbus Board

LEGACY *
  • AdvancedTCA 3.0 Release 2.0 compliant
  • 2eSST VMEbus compliant
  • 320 Mbyte/s transfer rate
  • VME System Controller or Peripheral slot 
  • PCIe up/downstream to another ATC103/104 /105/ATC106/ATC107/ ATC108/AMC103 or the PCI103 carrier board via the rear
  • PCIe up/downstream port available with either fiber or copper interface
  • P1, P2 and P0 connectors
  • P0 Ethernet to Zone 2 (VITA 31.1)
  • IPMI Version 2.0 compliant
  • PICMG 3.0 Base interface
  • OS support for:
    • Linux
    • Windows
    • Solaris
    • VxWork

Download Datasheet Add to Info Request

add to compare
0

ATC106 is an ATCA carrier that hosts any single slot VMEbus board via a VME64x interface. The TC106 has up/downstream ports to allow an outside host processor access to the VMEbus board without routing the VMEbus signals through the ATCA backplane. An external blade can use an AMC103 or PCI103 to link to the ATC106. The VMEbus board can be configured to run in transparent, non-transparent mode or root complex mode.

The ATC106 can be linked to other VadaTech products such as the ATC103/ATC104/ ATC105/ATC107/ATC108/AMC103 and to other ATC106s via the PCIe up/downstream port so that all I/O modules are made available to the host seamlessly. This modular approach allows an AdvancedTCA chassis to integrate widely available VMEbus form factor boards into an ATCA chassis. The VMEbus interface utilizes the 2eSST VMEbus protocol with a 320 Mbyte/s transfer rate across the VMEbus. The ATC106 can also utilize the legacy protocol for older VMEbus products.

The ATC106 can be configured as a Shelf Manager or a Node board. As a Shelf Manger, the ATC106 eliminates the need for other shelf managers in the system which reduces the total system cost. The shelf manager implements IPMI management, FRU management, and shelf environment management for power, thermal, E-keying, etc. 

Key Features
  • AdvancedTCA 3.0 Release 2.0 compliant
  • 2eSST VMEbus compliant
  • 320 Mbyte/s transfer rate
  • VME System Controller or Peripheral slot 
  • PCIe up/downstream to another ATC103/104 /105/ATC106/ATC107/ ATC108/AMC103 or the PCI103 carrier board via the rear
  • PCIe up/downstream port available with either fiber or copper interface
  • P1, P2 and P0 connectors
  • P0 Ethernet to Zone 2 (VITA 31.1)
  • IPMI Version 2.0 compliant
  • PICMG 3.0 Base interface
  • OS support for:
    • Linux
    • Windows
    • Solaris
    • VxWork
Benefits
  • Shelf management functionality included
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level
     expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

ART115

ATCA Rear I/O Transition Module

  • ATCA rear I/O Module for Blades
    • i.e. Sun Microsystems Netra Blade CP3260,CP3220, VadaTech ATC114, etc.
  • Dual DVI/VGA interface
  • Resolution @ 1920x1200
  • Dual 10GbE SFP+
  • Removable on board 2.5” SAS/SATA Disk
  • Two port USB 2.0 high speed (480Mbit/s)
  • Front Blade Dual GbE to RJ-45 or LC Fiber(option for SX or LX)
  • Front Blade Management RS-232 to RJ-45
  • Dual RS-232 for the host blade
  • IPMI 2.0 Management Controller
  • RoHS compliant
View product ART115 Data Sheet

ATC800

48-Port GbE with 10-GbE Uplink Switch

  • AdvancedTCA open standard form factor
  • Linux operating system
  • Open Architect™ firmware 
  • Run as the Shelf Manager or Node board
  • Five front panel 10/100/1000Base-T ports
  • Nine front panel SFP ports
  • Front panel XFP egress port for 10GbE
  • GbE to Base Interface for 14 payload slots and Shelf Manager
  • Eighteen GbE ports to Zone 3 for use with an RTM
  • 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
  • PICMG 3.1 compliant
  • IEEE 802.3 compliant
  • IPMI Version 2.0 compliant
View product ATC800 Data Sheet

VT830

6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers

  • 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
  • 10GbE/GbE Managed Layer 2
  • 40GbE/10GbE/GbE Managed Layer 3
  • 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
  • Split power distribution (odd slots on A1/B1,even slots on A2/B2)
  • Redundant Power supplies AC (DC or AC/DC optional)
  • Up to four AC supply at 1300W each (N+1)
  • 6 Rear Transition Module (RTM) slots
View product VT830 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.

* Legacy product only – not recommended for new applications