ATCA Carrier for Two PCI-X Modules

  • AdvancedTCA 3.0 Release 2.0 compliant
  • Supports two PCI-X edge style cards
  • 64-bit @ 133 Mhz
  • Dedicated PCI-X bus for each slot
  • PCIe up/downstream to ATC114/ATC115/ATC/ATC117/118, PCI113 or AMC113 via the front or rear
  • Adjustable hold down brackets to hold the PCI module down
  • PCIe Front panel up/down stream via QSFP (Copper or Fiber cable)
  • IPMI Version 2.0 compliant
  • OS Independent

Download Datasheet Add to Info Request

add to compare
0

The ATC118 is the VadaTech next generation Advanced Telecom Computing Architecture (AdvancedTCA) carrier which allows for the integration of two PCI-X cards into the AdvancedTCA environment.

The two PCI-X slots are independent and can run at different speeds. The ATC118 has a PCIe up/down port to interface to other Blades or VadaTech products, such as the ATC114/ATC115/ATC116/118/119, PCI113 or AMC113. This modular approach allows widely available PCI-X form factor boards to be integrated into an ATCA chassis.

The IMPI management implements FRU management,thermal, E-keying, etc.

Key Features
  • AdvancedTCA 3.0 Release 2.0 compliant
  • Supports two PCI-X edge style cards
  • 64-bit @ 133 Mhz
  • Dedicated PCI-X bus for each slot
  • PCIe up/downstream to ATC114/ATC115/ATC/ATC117/118, PCI113 or AMC113 via the front or rear
  • Adjustable hold down brackets to hold the PCI module down
  • PCIe Front panel up/down stream via QSFP (Copper or Fiber cable)
  • IPMI Version 2.0 compliant
  • OS Independent
Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level
     expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

ATC800

48-Port GbE with 10-GbE Uplink Switch

  • AdvancedTCA open standard form factor
  • Linux operating system
  • Open Architect™ firmware 
  • Run as the Shelf Manager or Node board
  • Five front panel 10/100/1000Base-T ports
  • Nine front panel SFP ports
  • Front panel XFP egress port for 10GbE
  • GbE to Base Interface for 14 payload slots and Shelf Manager
  • Eighteen GbE ports to Zone 3 for use with an RTM
  • 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
  • PICMG 3.1 compliant
  • IEEE 802.3 compliant
  • IPMI Version 2.0 compliant
View product ATC800 Data Sheet

VT830

6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers

  • 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
  • 10GbE/GbE Managed Layer 2
  • 40GbE/10GbE/GbE Managed Layer 3
  • 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
  • Split power distribution (odd slots on A1/B1,even slots on A2/B2)
  • Redundant Power supplies AC (DC or AC/DC optional)
  • Up to four AC supply at 1300W each (N+1)
  • 6 Rear Transition Module (RTM) slots
View product VT830 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.