AMC502

FPGA Carrier with Dual FMC, Kintex-7, AMC

  • AMC FPGA carrier for dual FPGA Mezzanine Card (FMC) per VITA 57
  • Double module, mid-size ( full-size optional)
  • Xilinx Kintex-7 FPGA (XC7K420T) in a FFG1156 package
  • AMC Ports 4-7 and 8-11 are routed to FPGA per AMC.1,AMC.2 and AMC.4 (protocols such as PCIe, SRIO, XAUI,etc. are FPGA programmable)
  • 32 MB of Flash memory

Download Datasheet Add to Info Request

add to compare
0

The AMC502 is an AMC FPGA Carrier with dual FMC (VITA 57) interface. This allows the versatility of various FMC modules to be implemented. The module is compliant to the AMC.1, AMC.2 and/or AMC.4 specifications.

The onboard, re-configurable FPGA interfaces directly to AMC FCLKA, TCLKA-D, FMC DP0-3, and all FMC LA/HA/HB pairs. Port 3 can be routed as LVDS.

AMC502 has an onboard crystal-referenced clock source to provide at least 125 MHz as GTX reference inputs for PCIe, SRIO and GbE. The iMX6 CPU is a quad core ARM processor at 1 GHz for power-efficient distributed processing.

 

Key Features
  • AMC FPGA carrier for dual FPGA Mezzanine Card (FMC) per VITA 57
  • Double module, mid-size ( full-size optional)
  • Xilinx Kintex-7 FPGA (XC7K420T) in a FFG1156 package
  • AMC Ports 4-7 and 8-11 are routed to FPGA per AMC.1,AMC.2 and AMC.4 (protocols such as PCIe, SRIO, XAUI,etc. are FPGA programmable)
  • 32 MB of Flash memory
Benefits

 

  • The LVDS cross-bar switch provides improved clock flexibility
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

FMC210

FMC ADC 10-bit @ 2.6 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA-57
  • Single ADC EV10AS150B @2.5 GSPS
  • Single module
  • 5 GHz Full Power Input Bandwidth (-3dB)
  • True single core architecture (no calibration required)
  • External Interleaving:Full scale analog input Voltage Span 500mVpp
    • Gain Adjust
    • Offset Adjust
    • Sampling Delay Adjust
  • All front panel input/outputs are via MMCX:
    • Analog Input
    • Reference clock
    • Trig in/out
    • General purpose I/O
  • Super low phase noise RF PLL Synthesizer
View product FMC210 Data Sheet

FMC214

70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • On-board clocking with multi-card synchronization capability
  • Low Pin Count (LPC) 160-pin connector
View product FMC214 Data Sheet

FMC223

FMC High-speed DAC 14-bit at 2.5 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Single module  AD9739 DAC 14-bit at 2.5 GSPS
  • 2 Vpp differential Analog output swing
  • Programmable DSP clock
  • Dynamic performance
    • 8 QAM carriers @ 400 MHz IF –71 dBc
    • 16 QAM carriers @ 400 MHz IF –68 dBc
    • 32 QAM carriers @ 400 MHz IF –65 dBc
    • 72 QAM carriers @ 600 MHz IF –61 dBc
  • Single tone NSD @ 2.4 GSPS
    • 166 dBm/Hz @ 100 MHz IF
    • 162 dBm/Hz @ 1 GHz IF
  • Connection via MMCX for Analog Out and Reference Clock Input
  • Connection via LVDS for TRIG In/Out and GPIO
  • RoHS compliant
View product FMC223 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.