AMC Dual-port 10GbE, RJ-45

  • Dual 10GbE over RJ45
  • PCIe Gen3 x4 lanes, AMC.1 compliant
  • IEEE P802.1AE LinkSec
  • IPV6 Support for IP/TCP
  • 10Gb/s full duplex bandwidth
  • TCP Segmentation off load: up to 256 KB
  • Jumbo Frames of up to 15.5 KB
  • Dynamic Interrupt moderation
  • Eight VLAN L2 Filters
  • 16 Flex L3 Port Filters
  • Four L3 Address Filters (IPV4)
  • Four L3 Address Filters (IPV6)
  • IPMI 2.0 compliant
  • RoHS compliant

Download Datasheet Add to Info Request

add to compare
0

The AMC232 is a single-width, mid-height AdvancedMCTM (AMC) based on the AMC.1 specification (full-height option available). The AMC232 provides Dual 10 Gigabit Ethernet via front panel RJ-45.

The AMC232 supports IEEE802.1AE LinkSec Specifications. The module can off-load IPsec for up to 1024 Security Associations (SA) for each TX and RX.

The AMC232 provide wire speed dual-port 10GbE throughput. The module reduces end-toend latency for high priority traffic. In order to enhance the CPU utilization, the module supports Receive Side Coalescing (RSC).

The AMC232 supports the IEEE P802.1AE LinkSec specification. It incorporates an in-line packet crypto unit, off-load IPSec for up to 1024 Security Associations (SA), AH and ESP protocols for authentication and encryption, AES-128-GMAC and AES-128-GCM.

Key Features
  • Dual 10GbE over RJ45
  • PCIe Gen3 x4 lanes, AMC.1 compliant
  • IEEE P802.1AE LinkSec
  • IPV6 Support for IP/TCP
  • 10Gb/s full duplex bandwidth
  • TCP Segmentation off load: up to 256 KB
  • Jumbo Frames of up to 15.5 KB
  • Dynamic Interrupt moderation
  • Eight VLAN L2 Filters
  • 16 Flex L3 Port Filters
  • Four L3 Address Filters (IPV4)
  • Four L3 Address Filters (IPV6)
  • IPMI 2.0 compliant
  • RoHS compliant
Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC211

AMC Dual Port 10GbE Module, SFP+

  • AMC.1 compliant
  • PCIe Gen2 x8 lanes
  • Dual SPF+
  • 10Gb/s full duplex bandwidth
  • TCP Segmentation off load: up to 256KB
  • Jumbo Frames of up to 15.5KB
  • IPV6 Support for IP/TCP
  • Dynamic Interrupt moderation
  • Eight VLAN L2 Filters
  • 16 Flex L3 Port Filters
  • Four L3 Address Filters (IPV4)
  • Four L3 Address Filters (IPV6)
  • IEEE P802.1AE LinkSec
  • OS support for:
    • Linux
    • Windows
    • Solaris
View product AMC211 Data Sheet

UTC020

DC Power Module, 936W

  • Single module, full-size per AMC.0
  • Dual -36V DC to -75V DC input, 936W (available in 468W)
  • Hot swappable with support for power module redundancy
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
View product UTC020 Data Sheet

VT866

5U µTCA Chassis, 12 Full Size AMC, 40GbE

  • μTCA System Platform 19” x 5U x 10.5” deep (with handles 12” deep)
  • Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and dual Power Modules
  • Up to 12 AMCs in single width/full-size
  • Radial I2C bus to each AMC
  • High-speed routing on 36 layers
  • 40GbE capable
  • Redundant FRU information devices and carrier locators
  • Redundant 1000W AC or DC Power supply
  • Telco Alarm
  • FCLKA, TCLKA, TCLKB, TCLKC and TCLKD with advanced redundancy capability
  • JTAG Switch Module (JSM) option
  • No active components on the backplane
  • ESD-Jack at the top front
  • RoHS compliant

 

View product VT866 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.