MTCA.4 RTM for AMC523, 12 Ch ADC 16-bit @ 125 MSPS

  • MicroTCA.4 RTM for the AMC523
  • Twelve channel ADC 16-bit @ 125 MSPS utilizing AD9653 device routed to AMC523
  • Two analog outputs from AMC523’s DACs Mezzanine
  • ADC and DAC signal routed through amezzanine
  • Three pairs of user defined digital I/O
  • Double module, mid-size (full-size optional)

Download Datasheet Add to Info Request

add to compare
0

The MRT523 is a Rear Transition Module (RTM) for VadaTech’s AMC523. The MRT523 accepts a mezzanine card (sold separately) to provide the ADC, DAC and Clock I/Os.

The MRT523 provides three quad channel ADCs (AD9653) on board to provide a total of 12 channels ADC 16-bit @ 125 MSPS. The ADC accept input voltage of +/–1V DC coupled, 100 Ohm load. There are also dual DAC outputs with routing to the AMC523 where the DAC ICs reside. The ADCs, DAC and Clocks signals to the mezzanine are provided through five 20-pin ZIF connectors onboard the MRT523.

Refer to the mezzanine card datasheets (MZ523x for VadaTech versions) for available I/O channels and signal conditioning options. If you are using a custom or third-party mezzanine, ensure that the analog inputs are within +/–1V.

VadaTech offers a wide range of MicroTCA.4 products, including full systems. Contact your local salesperson or representative for details.

 

 

VIDEO: AD9653 - based Data Acquisition from VadaTech: This video provides a hardware and software description of the standard modules AMC523 and MRT523 integrating three quad-channel AD9653 from Analog Devices with Xilinx FPGA Kintex-7. The video includes a demonstration of the VadaTech DAQ Series™ BSP with embedded DMA engine, real time data display and memory buffer occupancy. In this video we also demonstrate the capability setup the acquisition parameters and include Simulink blocks into the FPGA design.

VIDEO: EPICS - based Data Acquistion for Physics Research from VadaTech: This video shows how VadaTech DAQ Series™ including EPICS driver accelerates the integration of digitizer/converters in EPICS-based facilities.

VIDEO: Vadatech ADI Offerings: This video introduces the advantages of using VadaTech to build your new products embedding Analog Devices digitizer and converters.

Key Features
  • MicroTCA.4 RTM for the AMC523
  • Twelve channel ADC 16-bit @ 125 MSPS utilizing AD9653 device routed to AMC523
  • Two analog outputs from AMC523’s DACs Mezzanine
  • ADC and DAC signal routed through amezzanine
  • Three pairs of user defined digital I/O
  • Double module, mid-size (full-size optional)
Benefits
  • Expertise in RTM and MTCA.4 board design
  • Full ecosystem of MicroTCA.4 AMCs, PMs, MCH, RTMs, chassis, and application-ready systems
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC523

Dual DAC 16-bit @ 250 MSPS, Kintex-7, MTCA.4

  • Dual DAC 16-bit @ 250 MSPS utilizing MAX5878 device (user programmable for lower sampling rate)
  • Xilinx Kintex-7 FPGA XC7K410T in FFG900 package
  • Supported by DAQ Series™ data acquisition software
  • 2 GB of DDR3 memory
  • Internal clock or precision external clock from RTM/backplane/front panel clocks
  • Trig in/out configurable by software (external trigger via front or port 17)
  • x8 PCIe (or dual x4)
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Quad SFP+ (up to 6.6 Gbps)
  • JTAG selectable front and backplane
View product AMC523 Data Sheet

UTC018

AC Power Module, 1000W

  • Double-module, 12HP size module per AMC.0
  • Universal AC input (85 to 265V), 1000W
  • Provides power up to 12 AMCs, 2 MCHs and Cooling Units
  • Very low ripple voltage on +12V
  • Hot swappable with two banks of 256K flash for redundancy
  • Dual IPMI bus
  • 32–bit RISC processor
View product UTC018 Data Sheet

VT811

8U uTCA.4 Chassis Platform

  • uTCA.4 Chassis Platform with rear I/O
  • 19” x 8U x 14.9” deep (with handles 16.23” deep)
  • Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and quad Power Modules
  • Up to twelve AMCs: 12 mid-size double module front module with 12 mid-size double module RTMs
  • Provision to route cables from the front to the back
  • Radial I2C bus to each AMC
  • High-speed 30 layer passive backplane
  • Redundant FRU information devices and carrier locator
  • Dual 1000W AC Power supply option Telco Alarm FCLKA, TCKA, TCKB, TCLKC AND TCLKD
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front
View product VT811 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.