MZ523C

Mezzanine for MRT523, 12 Channel Optical Detector

LEGACY *
  • 12 optical detectors routed to mezzanine connector
  • Per channel programmable gain, bandwidth and AC/DC coupling
  • 0 μW to 160 μW optical input power
  • 1310 nm to 1650 nm input wavelength
  • Noise 4 x 10-4 of full scale at min gain
  • Linearity <1%
  • Gain programmable 0-57 dB
  • Sensitivity 0.7 W/A typical
  • Mezzanine module for MRT523

Download Datasheet Add to Info Request

add to compare
0

The MZ523C is a mezzanine module for VadaTech’s MRT523. The AMC/MRT523 combination provides 12-channel ADC 16-bit @ 125 MSPS. This mezzanine provides 12 optical detectors with low-noise and high linearity amplifiers, routing detected signals to the ADCs.

MZ523C provides user-programmable selection, per channel, of input gain. The user can set parameters via an I2C controller in the AMC523 FPGA, to allow work over a wide dynamic range (the module is designed for gain settings to be set between bursts of data samples, not during data acquisition).

The AMC523, MRT523 and MZ523C in combination have the ability to store calibration data and correct, on a channel by channel basis, for offset, gain, bandwidth and non-linearity, so providing optimum performance.

The MZ523C complies with the MRT523 Mezzanine Interface Specification, which can be made available to research partners to allow them to develop their own application-specific mezzanine modules. Electrical connection to the MRT523 is via flexway cables and ZIF connectors for flexibility and ease of assembly.

 

Key Features
  • 12 optical detectors routed to mezzanine connector
  • Per channel programmable gain, bandwidth and AC/DC coupling
  • 0 μW to 160 μW optical input power
  • 1310 nm to 1650 nm input wavelength
  • Noise 4 x 10-4 of full scale at min gain
  • Linearity <1%
  • Gain programmable 0-57 dB
  • Sensitivity 0.7 W/A typical
  • Mezzanine module for MRT523
Benefits
  • Low noise and high linearity for demanding applications
  • Gain and anti-aliasing programmable via MRT523 for ease of use
  • DAQ Series software support for out-of-the-box operation
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC523

Dual DAC 16-bit @ 250 MSPS, Kintex-7, MTCA.4

  • Dual DAC 16-bit @ 250 MSPS utilizing MAX5878 device (user programmable for lower sampling rate)
  • Xilinx Kintex-7 FPGA XC7K410T in FFG900 package
  • Supported by DAQ Series™ data acquisition software
  • 2 GB of DDR3 memory
  • Internal clock or precision external clock from RTM/backplane/front panel clocks
  • Trig in/out configurable by software (external trigger via front or port 17)
  • x8 PCIe (or dual x4)
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Quad SFP+ (up to 6.6 Gbps)
  • JTAG selectable front and backplane
View product AMC523 Data Sheet

MRT523

MTCA.4 RTM for AMC523, 12 Ch ADC 16-bit @ 125 MSPS

  • MicroTCA.4 RTM for the AMC523
  • Twelve channel ADC 16-bit @ 125 MSPS utilizing AD9653 device routed to AMC523
  • Two analog outputs from AMC523’s DACs Mezzanine
  • ADC and DAC signal routed through amezzanine
  • Three pairs of user defined digital I/O
  • Double module, mid-size (full-size optional)
View product MRT523 Data Sheet

VT811

8U uTCA.4 Chassis Platform

  • uTCA.4 Chassis Platform with rear I/O
  • 19” x 8U x 14.9” deep (with handles 16.23” deep)
  • Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and quad Power Modules
  • Up to twelve AMCs: 12 mid-size double module front module with 12 mid-size double module RTMs
  • Provision to route cables from the front to the back
  • Radial I2C bus to each AMC
  • High-speed 30 layer passive backplane
  • Redundant FRU information devices and carrier locator
  • Dual 1000W AC Power supply option Telco Alarm FCLKA, TCKA, TCKB, TCLKC AND TCLKD
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front
View product VT811 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.

* Legacy product only - Not recommended for new applications.