AMC582

Xilinx Zynq® UltraScale+ FPGA, FMC Carrier, AMC

  • Xilinx Zynq® UltraScale+ XCZU7EV FPGA
  • Single FMC+ site (VITA 57.4)
  • 8 GB of 64-bit wide DDR4 Memory (single bank) with ECC
  • 8 GB of dual bank of 32-bit wide DDR4 to Fabric
  • MPSoC with block RAM and UltraRAM
  • SD Card (option)
  • 128 MB of boot Flash
  • 64 GB of user Flash

Download Datasheet Add to Info Request

add to compare
0

The AMC582 is an AMC FPGA Carrier with single FMC+ (VITA 57.4) interfaces. The AMC is compliant to AMC.1, AMC.2 and AMC.4 specifications. The unit has an onboard, re-configurable FPGA which interfaces directly to the AMC FCLKA, TCLKA-D, FMC DP0-15 and all FMC LA/HA/HB pairs (the module does not support HSPCe connector of the FMC+).

The FPGA has interface to a DDR4 memory channel (64-bit wide with ECC). Further the module has dual bank of DDR4 x32 to the fabric (total of 8 GB). This allows for large buffer sizes to be stored during processing as well as for queuing the data to the host.

The AMC is based on Xilinx UltraScale+ XCZU7EV MPSoC FPGA with single FMC site. The FPGA has 1,728 DSP Slices and 504k logic cells.

The XCZU7EV includes quad-core ARM application processor, dual-core ARM real-time processor and Mali™ graphics processing unit, as well as 6 Mb of block RAM and 27 Mbit of UltraRAM. An integrated H.264/H.265 video codec is capable of simultaneous encode and decode up to 4Kx2K (60 fps) for embedded video applications.

The module has onboard 64 GB of Flash, 128 MB of boot flash and an SD Card as an option.

Key Features
  • Xilinx Zynq® UltraScale+ XCZU7EV FPGA
  • Single FMC+ site (VITA 57.4)
  • 8 GB of 64-bit wide DDR4 Memory (single bank) with ECC
  • 8 GB of dual bank of 32-bit wide DDR4 to Fabric
  • MPSoC with block RAM and UltraRAM
  • SD Card (option)
  • 128 MB of boot Flash
  • 64 GB of user Flash
Benefits
  • FMC+ site on a single module AMC
  • Zynq UltraScale+ MPSoC
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC592

Kintex UltraScale FPGA Carrier for FMC, AMC

  • Single module, mid-size AMC (full-size optional)
  • AMC FPGA carrier for FMC per VITA 57
  • Xilinx UltraScale™ XCKU115 FPGA
  • Supported by DAQ Series™ data acquisition software
  • AMC Ports 12-15 and 17-20 are routed to the FPGA for direct FPGA to FPGA board communication
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 1/10/40GbE, etc. are FPGA programmable)
  • Two banks of 64-bit wide and a single bank of 32-bitwide DDR4 for a total of 20 GB
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
View product AMC592 Data Sheet

FMC214

70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • On-board clocking with multi-card synchronization capability
  • Low Pin Count (LPC) 160-pin connector
View product FMC214 Data Sheet

VT813

8U uTCA.4 Chassis Platform, (3+1) 4400W

  • μTCA.4 Chassis Platform with rear I/O
  • 19” x 8U x 14.9” deep (with handles 16.23” deep)
  • Full redundancy with dual MicroTCA Carrier Hubs (MCH), dual cooling units and quad PSUs
  • Up to twelve AMCs: 12 mid-size double modules in front with 12 mid-size, double-module in the rear
  • Provision to route cables from the front to the back
  • Radial I2C bus to each AMC
  • High-speed 30 layer passive backplane (40GbE ready)
  • Redundant FRU information devices and carrier locators
  • Four 1.1 kW AC Power supply for 4.4 kW total
  • Telco aarm
  • FCLKA, TCKA, TCKB, TCLKC AND TCLKD
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front and back
View product VT813 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.