12 TX/RX Fiber MTP/MPO, FMC+

  • 12 full duplex transceivers on FMC+ module
  • Supports link lengths up to 70 m (option for 100 m)
  • Multi-rate capability, options up to 28.1 Gb/s per channel
  • Total bi-directional bandwidth > 672 Gb/s
  • On board Ultra-low Jitter Clock generator with two independent PLL

Download Datasheet Add to Info Request

add to compare
0

The FMC258 is an FPGA Mezzanine Module per VITA 57.4 (FMC+) specification. It has a single Board-Mount Optical Assembly, providing 12 channel full-duplex transceivers with Clock Data Recovery (CDR) and front-panel Fiber I/O via MTP/MPO.

Transceivers are available in two speed grades, 10.6 Gb/s and 28.1 Gb/s per channel, both with multi-rate capability. The 10.6 Gb/s can drive 100 m over OM3 MM Fiber and 28.1 Gb/s can drive 100 m over the OM4 MM Fiber.

The module has an on board Ultra-Low Jitter Clock Generator with two independent fractional PLL. The clocking allows synchronization to an external clock input or onboard. Six clocks are routed to the GBT’s on the FMC+ pinouts and two are routed to CLK0 and CLK1 for a total of 8 clock outputs.

The Module has 16 LEDs in Green/Yellow to allow for LNK/ACT, debugging or as defined by user.

 

Key Features
  • 12 full duplex transceivers on FMC+ module
  • Supports link lengths up to 70 m (option for 100 m)
  • Multi-rate capability, options up to 28.1 Gb/s per channel
  • Total bi-directional bandwidth > 672 Gb/s
  • On board Ultra-low Jitter Clock generator with two independent PLL
Benefits
  • Extremely compact fiber I/O
  • Array of FMC’s and FMC+ carriers available from VadaTech
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from the industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC516

Virtex-7 FPGA Carrier for FMC, AMC

  •  AMC FPGA carrier for FMC per VITA-57
  • Xilinx Virtex-7 690T FPGA in FFG-1761 package with optional P2040
  • Supported by DAQ Series™ data acquisition software
  • AMC Ports 12-15 and 17-20 are routed to the FPGA
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Single module, mid-size AMC (full-size optional)
  • Clock jitter cleaner
  • IPMI 2.0 compliant
View product AMC516 Data Sheet

AMC530

Altera EP4S100G AMC FPGA

  • Altera Stratix IV Device EP4S100Gx in 1517 pin count (40mm x 40mm)
  • AMC Ports 2-3 and 4-11 are routed to FPGA (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • Ports 0 and 1 are Muxed with P2020 GbE
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • On board PLL for buffering/multiplying and jitter cleaner
  • Option for up to 16GB of DDR3 memory to the FPGA
  • Three banks of QDR-II+ each 72-bit wide
  • Option for on board Freescale QorIQ PPC2020 with up to 4GB DDR3
View product AMC530 Data Sheet

FMC210

FMC ADC 10-bit @ 2.6 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA-57
  • Single ADC EV10AS150B @2.5 GSPS
  • Single module
  • 5 GHz Full Power Input Bandwidth (-3dB)
  • True single core architecture (no calibration required)
  • External Interleaving:Full scale analog input Voltage Span 500mVpp
    • Gain Adjust
    • Offset Adjust
    • Sampling Delay Adjust
  • All front panel input/outputs are via MMCX:
    • Analog Input
    • Reference clock
    • Trig in/out
    • General purpose I/O
  • Super low phase noise RF PLL Synthesizer
View product FMC210 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.