FMC257

Dual NVMe Solid State Drives, FMC Storage and RS-485/RS-422, Singled Ended +3.3V

  • FMC Compact storage module
  • FMC with dual NVMe type Solid State Drive (SSD)
  • High performance with dual PCIe Gen3 x4 interface
  • Self-Encrypting Drive (SED) option
  • 8 x RS-485/RS-422 TX with speed up to 20 Mbps
  • 8 x RS-485/RS-422 RX with speed up to 52 Mbps
  • 8 x Singled-ended +3.3 V input or output

Download Datasheet Add to Info Request

add to compare
0

The FMC257 is a storage module with dual NVMe storage SSD which provides high speed and low latency read/write. The module allows the FPGA to access a large capacity of storage in a compact space. The FMC257 interfaces to the carrier via dual PCIe x4 (DP0-3 and DP4-7).

The storage has option for SED which is a hardware-based AES-256 Encryption engine.

Further the FMC257 provides eight RS-485/422 RX plus eight RS-485/422 TX, and eight single-ended +3.3V input or outputs (user configurable per I/O). 

The RS-485/422 configuration can be selected as full-duplex RS-422 (independent RX/TX pairs with RX termination) or half-duplex RS-485 (RX/TX pairs tied together, no termination on board) based on the ordering option. The FMC257 can provide power of up to 12W to an external module.

Note: VadaTech FPGA carrier reference design for the FMC257 uses VadaTech NVMe IP. The “NVM257” IP core for standalone NVMe Host Controller is not included in the deliverable of the FMC257 and needs to be purchased separately. Contact VadaTech Sales for details.

Key Features
  • FMC Compact storage module
  • FMC with dual NVMe type Solid State Drive (SSD)
  • High performance with dual PCIe Gen3 x4 interface
  • Self-Encrypting Drive (SED) option
  • 8 x RS-485/RS-422 TX with speed up to 20 Mbps
  • 8 x RS-485/RS-422 RX with speed up to 52 Mbps
  • 8 x Singled-ended +3.3 V input or output
Benefits
  • High-performance solid-state storage
  • Single Module to provide I/O
  • Compact industry standard form factor
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC516

Virtex-7 FPGA Carrier for FMC, AMC

  •  AMC FPGA carrier for FMC per VITA-57
  • Xilinx Virtex-7 690T FPGA in FFG-1761 package with optional P2040
  • Supported by DAQ Series™ data acquisition software
  • AMC Ports 12-15 and 17-20 are routed to the FPGA
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Single module, mid-size AMC (full-size optional)
  • Clock jitter cleaner
  • IPMI 2.0 compliant
View product AMC516 Data Sheet

AMC530

Altera EP4S100G AMC FPGA

  • Altera Stratix IV Device EP4S100Gx in 1517 pin count (40mm x 40mm)
  • AMC Ports 2-3 and 4-11 are routed to FPGA (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • Ports 0 and 1 are Muxed with P2020 GbE
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • On board PLL for buffering/multiplying and jitter cleaner
  • Option for up to 16GB of DDR3 memory to the FPGA
  • Three banks of QDR-II+ each 72-bit wide
  • Option for on board Freescale QorIQ PPC2020 with up to 4GB DDR3
View product AMC530 Data Sheet

FMC210

FMC ADC 10-bit @ 2.6 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA-57
  • Single ADC EV10AS150B @2.5 GSPS
  • Single module
  • 5 GHz Full Power Input Bandwidth (-3dB)
  • True single core architecture (no calibration required)
  • External Interleaving:Full scale analog input Voltage Span 500mVpp
    • Gain Adjust
    • Offset Adjust
    • Sampling Delay Adjust
  • All front panel input/outputs are via MMCX:
    • Analog Input
    • Reference clock
    • Trig in/out
    • General purpose I/O
  • Super low phase noise RF PLL Synthesizer
View product FMC210 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.