Multi I/O FMC Module, Differential Input, LVDS with Isolated Output

  • Multiple I/O in single FMC form-factor
  • LVDS and Isolated I/O
  • 7 x Differential Inputs
  • 5 x LVDS Input or Output
  • 2x Isolated General-Purpose Output (GPO) at +12V

Download Datasheet Add to Info Request

add to compare

The FMC157 is an FPGA Mezzanine Card (FMC) per VITA 57.1 standard, offering a small footprint and allowing for general-purpose I/O expansion.

The FMC157 provides 7x Differential Input, 5x LVDS and dual Isolated General-Purpose Output (GPO) with drivers at +12V.

Key Features
  • Multiple I/O in single FMC form-factor
  • LVDS and Isolated I/O
  • 7 x Differential Inputs
  • 5 x LVDS Input or Output
  • 2x Isolated General-Purpose Output (GPO) at +12V
  • Single module to provide multiple I/O
  • Utilizing commercially-available, standard high-density connector for ease of cabling
  • All I/O types utilize differential signaling between the transceivers on the FMC and the FPGA on the carrier for optimal signal integrity across the FMC connector
  • Programmable LVDS termination and routing
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company

Block diagram

Related Products


Dual ADC @ 6.4 GSPS and Dual DAC @ 12 GSPS, UltraScale, AMC

  • Xilinx UltraScale™ XCKU115 FPGA
  • Dual ADC 12-bit @ 10.4/6.4 GSPS or quad ADC @ 5.2/3.2 GSPS with TI ADC12DJ5200 or ADC12DJ3200
  • Option for ADC12DJ5200, ADC12DJ3200 or ADC12DJ2700
  • Dual DAC 16-bit @12 GSPS (AD9162 or AD9164)
  • Two banks of 64-bit wide and a single bank of 32-bit wide DDR4 for a total of 20 GB
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 1/10/40GbE, etc. are FPGA programmable)
  • Clock jitter cleaner
  • IPMI 2.0 compliant
View product AMC599 Data Sheet


70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • On-board clocking with multi-card synchronization capability
  • Low Pin Count (LPC) 160-pin connector
View product FMC214 Data Sheet


1U Rugged Chassis Platform with 6 AMC Slots, PCIe Gen 3 and Dual PSU

  • MicroTCA rugged 1U 19” rackmount chassis platform
  • Designed to meet MIL-STD-810F, MIL-STD-901D for shock/vibration
  • Compliant to MIL-STD-461E for EMI
  • Supports up to six single mid-size modules
  • Full Layer 2 or 3 managed Ethernet switch
  • Dual x4 or single x8 PCIe Gen 3 per AMC slot
  • Chassis accepts AMCs with single retention screw opposite of ejector handle on each slot
  • Management can run as Shelf/MCMC or MicroTCA Carrier Management Controller (MCMC)
  • Dual redundant PSUs located in the rear of the chassis
  • AMC.1, AMC.2, AMC.3 and AMC.4 compliant
  • Front to back airflow
View product VT951 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.