32x ECL or NECL Input with Clock synchronization and Dual ADC

  • 32 x ECL or NECL Receiver with clock synchronization
  • Dual HMCAD1511 ADC to monitor clock input accuracy
  • 10MHz Clock Input
  • 100Mhz Clock Input
  • 1PPS Clock Input
  • IRIG-B Clock Input (Digital)
  • User LED

Download Datasheet Add to Info Request

add to compare

The FMC152 is an FPGA Mezzanine Card (FMC) per VITA 57.1 standard (see comment below) offering a small footprint and allowing for general ECL or NECL 32x parallel data input with synchronization.

There are two HMCAD1511 ADC on board to monitor the clock inputs. The FMC152 has low pass filers on board to clean the 1PPS, the dual 100MHz as well as the 10MHz clock before the input of the ADC.

Clocks and Data are input to the FMC152 via dual high-density connectors.

This Module does not follow the VITA57 height constrain. It has an additional connector on the back of the FMC to accommodate the I/O. For example, on the AMC FPGA FMC Carriers, it requires a full-height AMC panel to accommodate all the I/Os. The Carrier must have a monolithic panel (the FMC152 does not come with an FMC panel) to cover the FMC152 I/O envelope.

Key Features
  • 32 x ECL or NECL Receiver with clock synchronization
  • Dual HMCAD1511 ADC to monitor clock input accuracy
  • 10MHz Clock Input
  • 100Mhz Clock Input
  • 1PPS Clock Input
  • IRIG-B Clock Input (Digital)
  • User LED
Benefits
  • Single module to receive ECL/NEC Parallel data
  • Utilizing commercially-available, standard high-density connector for ease of cabling
  • All I/O types utilize differential signaling between the transceivers on the FMC and the FPGA on the carrier for optimal signal integrity across the FMC connector
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC599

Dual ADC @ 10.4 or 6.4 GSPS and Dual DAC @ 12 GSPS, UltraScale, AMC

  • Xilinx UltraScale™ XCKU115 FPGA
  • Dual ADC 12-bit @ 10.4/6.4 GSPS or quad ADC @ 5.2/3.2 GSPS with TI ADC12DJ5200 or ADC12DJ3200
  • Option for ADC12DJ5200, ADC12DJ3200 or ADC12DJ2700
  • Dual DAC 16-bit @12 GSPS (AD9162 or AD9164)
  • Two banks of 64-bit wide and a single bank of 32-bit wide DDR4 for a total of 20 GB
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 1/10/40GbE, etc. are FPGA programmable)
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Clock jitter cleaner
  • IPMI 2.0 compliant
View product AMC599 Data Sheet

FMC214

70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • On-board clocking with multi-card synchronization capability
  • Low Pin Count (LPC) 160-pin connector
View product FMC214 Data Sheet

VT951

1U Rugged Chassis Platform with 6 AMC Slots, PCIe Gen 3 and Dual PSU

  • MicroTCA rugged 1U 19” rackmount chassis platform
  • Designed to meet MIL-STD-810F, MIL-STD-901D for shock/vibration
  • Compliant to MIL-STD-461E for EMI
  • Supports up to six single mid-size modules
  • Full Layer 2 or 3 managed Ethernet switch
  • Dual x4 or single x8 PCIe Gen 3 per AMC slot
  • Chassis accepts AMCs with single retention screw opposite of ejector handle on each slot
  • Management can run as Shelf/MCMC or MicroTCA Carrier Management Controller (MCMC)
  • Dual redundant PSUs located in the rear of the chassis
  • AMC.1, AMC.2, AMC.3 and AMC.4 compliant
  • Front to back airflow
View product VT951 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.