Zynq UltraScale+ FPGA Video Streaming with USB 2.0, AMC

  • Xilinx UltraScale+ XCZU7EV FPGA
  • Double module, full-size
  • Rear Transition Module (RTM) per uTCA.4
  • 4x Video Stream from the RTM
  • Dual USB 2.0 from the RTM to FPGA
  • Quad USB 2.0 as pass thru to front panel
  • 8 GB of 64-bit wide DDR4 Memory (single bank) with ECC to PS Side
  • Dual 4 GB 32-bit wide DDR4 to the PL Side
  • SD Card
  • 128 MB of boot Flash

Download Datasheet Add to Info Request

add to compare

The AMC314 is an AMC FPGA module with Zynq UltraScale+ EV part. The AMC is compliant to AMC.1, AMC.2, AMC.3 and AMC.4 specifications. It is based on Xilinx UltraScale+ XCZU7EV MPSoC FPGA with an RTM (such as the MRT314A).

The Module has a single bank of 8GB of DDR-4 64-bit wide with ECC to the PS and in addition dual bank of x32 DDR-4 to the PL for a total of 8GB.

The RTM may provide up to four Video streaming and dual USB ports to the FPGA.

The module brings out as pass thru 4 x USB2.0 to the front.

Key Features
  • Xilinx UltraScale+ XCZU7EV FPGA
  • Double module, full-size
  • Rear Transition Module (RTM) per uTCA.4
  • 4x Video Stream from the RTM
  • Dual USB 2.0 from the RTM to FPGA
  • Quad USB 2.0 as pass thru to front panel
  • 8 GB of 64-bit wide DDR4 Memory (single bank) with ECC to PS Side
  • Dual 4 GB 32-bit wide DDR4 to the PL Side
  • SD Card
  • 128 MB of boot Flash
Benefits
  • Zynq UltraScale+ MPSoC
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

MRT314A

Four Video input via Optics with dual USB 2.0 over Optics MTCA.4 RTM for AMC314

  • 4 RTM for the AMC314 Module
  • Four Video Input over Optics
  • Dual USB 2.0 over Optics (as end points)
View product MRT314A Data Sheet

UTC006

3rd Gen MicroTCA Carrier Hub (MCH), Double Module, 40/10GbE/PCIe/FPGA/SRIO

  • Fabric options include PCIe Gen3, 40/10GbE, SRIO, Cross Bar Switch (CBS) or Xilinx Virtex-7 690T FPGA for complete flexibility
  • Front panel fabric expansion, e.g. quad ports forPCIe Gen 3 (x4, x8, or x16)
  • PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588
  • Double module, full size per AMC.0 and MTCA.4
  • 1GbE base switch with dual 100/1000/10 G uplink
  • Full Layer 3 managed Ethernet switch
  • Unified 1 GHz quad-core CPU for MicroTCA Carrier Management Controller (MCMC), Shelf Manager, Clocking, and Fabric management
  • Automatic fail-over with redundant UTC006s
View product UTC006 Data Sheet

VT813

8U uTCA.4 Chassis Platform, (3+1) 4400W

  • μTCA.4 Chassis Platform with rear I/O
  • 19” x 8U x 14.9” deep (with handles 16.23” deep)
  • Full redundancy with dual MicroTCA Carrier Hubs (MCH), dual cooling units and quad PSUs
  • Up to twelve AMCs: 12 mid-size double modules in front with 12 mid-size, double-module in the rear
  • Provision to route cables from the front to the back
  • Radial I2C bus to each AMC
  • High-speed 30 layer passive backplane (40GbE ready)
  • Redundant FRU information devices and carrier locators
  • Four 1.1 kW AC Power supply for 4.4 kW total
  • Telco aarm
  • FCLKA, TCKA, TCKB, TCLKC AND TCLKD
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front and back
View product VT813 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.