Chassis Manager carrier for 3U VPX based on VadaTech VT042 Module

  • Quad ARM Cortex-A53 @ 1.6 GHz per core
  • 4GB LP-DDR4 memory
  • FRAM for log messages
  • 64 NAND Flash
  • I2C Real Time Clock with battery backup
  • Low power (2W)
  • Based on the VadaTech VT042 Module
  • IPMI 2.0 compliant

Download Datasheet Add to Info Request

add to compare

The VadaTech VPX984 Chassis Manager is based on the VITA 46.11 specification. The VITA 46.11 leverages the Intelligent Platform Management Interface (IPMI) and AdvancedTCA Specification by PICMG as its architectural foundation. The VPX984 is a carrier for VadaTech VT042 Module which provides all the health management to the VPX system. VT042 - System Management for VPX Chassis, 4th Generation (vadatech.com).

The VadaTech Chassis Management solution is derived from our field proven VadaTech ATCA Shelf Manager utilizing core interfaces such as the Simple Network Management Protocol (SNMP), Remote Management Control Protocol (RMCP), Web Interface, System Management application (Scorpionware™), and a user-friendly Command Line Interface.The Module has GbE as 1000Base-TX to the front panel connecting to the Shelf Manager or as GbE to P1 as 1000Base-BX (SERDES Based). The module also had 10/100 Ethernet port in the front as well as 10/100 Ethernet going to P2 connector for fail over between two VPX984. The P2 connector also carries further signals for fail over between the two modules for full fail over.

The Module has GbE as 1000Base-TX to the front panel connecting to the Shelf Manager or as GbE to P1 as 1000Base-BX (SERDES Based). The module also had 10/100 Ethernet port in the front as well as 10/100 Ethernet going to P2 connector for fail over between two VPX984. The P2 connector also carries further signals for fail over between the two modules for full fail over.

The module allows the P1 and/or P2 to be installed as load option for chassis that don’t route the signals.

Key Features
  • Quad ARM Cortex-A53 @ 1.6 GHz per core
  • 4GB LP-DDR4 memory
  • FRAM for log messages
  • 64 NAND Flash
  • I2C Real Time Clock with battery backup
  • Low power (2W)
  • Based on the VadaTech VT042 Module
  • IPMI 2.0 compliant
Benefits
  • Supports VITA 46.11 Tier-2 command set
  • Utilizing VadaTech VT042 fourth generation Shelf
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related News
Related Products

VPX551

Dual Kintex UltraScale™, 6U VPX

  • Dual Kintex UltraScale™ XCKU115
  • 16 GB of 64-bit wide DDR4 Memory to each FPGA
  • Rear fibre I/O via VITA 66.5
  • Front fibre via SFP+
  • Health Management through dedicated Processor
View product VPX551 Data Sheet

VPX752

Intel® Xeon™ SoC, PCIe Gen3 and 10GbE (XAUI), 6U VPX

  • 6U VPX module Intel 5th Generation Xeon-D SoC
  • PCIe Gen3 x16 (dual x8 or quad x4)
  • Quad 10GbE XAUI
  • Front-panel video out via DP with dual USB3.0
  • Dual front panel 100/1000/10G Ports
  • Single XMC site with I/O expansion going to P5/P6
  • Dual isolated RS-422/485 and a single RS-232 port
  • Health Management through dedicated Processor
View product VPX752 Data Sheet

VTX866

11U VPX Chassis, Twelve 6U Slots with RTM Support

  • 11U Open VPX rackmount system platform
  • Dual Dedicated Switch/management slots
  • Up to ten 6U VPX payload slots (with two slots that can have up to 10 HP)
  • Compatible with 0.8-inch, 0.85-inch and 1.0-inch modules
  • Support for Rear Transition Modules (RTMs)
  • Redundant cooling in push/pull front-to-back airflow configuration
  • Optional JTAG Switch Module (JSM)
View product VTX866 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.