FMC Quad 5/2.5/1GBASE-T with 100/10BASE-T Copper

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Single module
  • Quad 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T
  • A wide variety of interfaces to MAC USXGMII/XFI/RXAUI/5GBASE-R/2500BASE-X/SGMII
  • IEEE 1588v2 Time Stamping and Synchronous Ethernet
  • MACsec function – full 802.1ae compliance supporting default cipher suite GCM-AES-128

Download Datasheet Add to Info Request

add to compare

The FMC119 is an FPGA Mezzanine Card per VITA 57 specification. The FMC119 has a quad RJ-45 which can support 10/100/1000/2.5/5GBASE-T over copper with Category 6, 6A and 7 twisted-pair cable. The module interfaces to the MAC with multiple protocols such as USXGMII/XFI/RXAUI/5GBASE-R/2500BASE-X/SGMII.

The Module supports transceiver-MAC to magnetics with IEEE802.3az for all supported data rate (10/100/1000/2.5G/5GBASE-T).

The module supports MACsec with full 802.1ae compliance supporting default cipher suite GCM-AES-128. The module has integral FIFOs to absorb MACsec processing overhead and can support both cut-through and store forward modes.

Further the module is capable of IEEE1588v2 time stamping and Synchronous Ethernet.

Key Features
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Single module
  • Quad 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T
  • A wide variety of interfaces to MAC USXGMII/XFI/RXAUI/5GBASE-R/2500BASE-X/SGMII
  • IEEE 1588v2 Time Stamping and Synchronous Ethernet
  • MACsec function – full 802.1ae compliance supporting default cipher suite GCM-AES-128
Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC517

Kintex-7 FPGA Carrier for FMC, AMC

  •  AMC FPGA carrier for FMC per VITA 57
  • Xilinx Kintex-7 410T FPGA in FFG-900 package with optional P2040
  • Supported by DAQ Series™ data acquisition software
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • Single module, mid-size AMC (full-size optional)
  • Clock jitter cleaner
  • IPMI 2.0 compliant
View product AMC517 Data Sheet

AMC532

Altera Carrier for FMC, Stratix® V (5SGXEA)

  • Single module, mid-size or full-size
  • AMC FPGA based on Altera Stratix® V (5SGXEA) in F1932 package
  • VITA 57.1 FMC HPC Connector (compatible with LPC)
  • AMC Ports 0-15, 17-20 and FMC Ports DP0-9 are routed for high speed SERDES protocols
  • All FMC LA, HA, HB pairs routed bi-directionally
  • High-speed SERDES protocols such as PCIe x4, SRIO, XAUI, 1000Base-X are FPGA programmable
  • Onboard PLL for buffering/multiplying and jitter cleaner (Stratum-3)
  • M-LVDS/LVDS Clock crossbar switch for flexible clock routing
  • 4 GB of DDR3 memory to FPGA (4 channels x 1 GB each)
  • Serial Over LAN (SOL) with hardware RNG
View product AMC532 Data Sheet

FMC210

FMC ADC 10-bit @ 2.6 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA-57
  • Single ADC EV10AS150B @2.5 GSPS
  • Single module
  • 5 GHz Full Power Input Bandwidth (-3dB)
  • True single core architecture (no calibration required)
  • External Interleaving:Full scale analog input Voltage Span 500mVpp
    • Gain Adjust
    • Offset Adjust
    • Sampling Delay Adjust
  • All front panel input/outputs are via MMCX:
    • Analog Input
    • Reference clock
    • Trig in/out
    • General purpose I/O
  • Super low phase noise RF PLL Synthesizer
View product FMC210 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.