AMC577

Zynq UltraScale+ RFSoC FPGA, Double AMC, MTCA.4

  • Xilinx UltraScale+ RFSoC XCZU49DR FPGA
  • 16 ADC and 16 DAC to the rear
  • 8 GB of 64-bit wide DDR4 Memory (single bank) with ECC to CPU
  • 8 GB of 64-bit wide DDR4 Memory (single bank to Fabric)
  • MPSoC with block RAM and UltraRAM
  • SD Card (option)
  • 128 MB of boot Flash
  • 64 GB of user Flash
  • Double module, full-size, MTCA.4

Download Datasheet Add to Info Request

add to compare

The AMC577 utilizes the Xilinx XCZU49DR RFSoC. The AMC is compliant to AMC.1, AMC.2, AMC.3 and AMC.4 specifications. The unit has an on-board, re-configurable FPGA which interfaces directly to the AMC FCLKA, TCLKA-D. The module has two banks of 64-bit wide DDR4 memory (for PS and PL), with ECC on the PS side, for a total of 16 GB. This allows for large buffer sizes to be stored during processing as well as for queuing the data to the host.

The RFSoC device includes 16 ADC (14-bit @ 2.5 GSPS) and 16 DAC (14-bit @ ~9.7 GSPS) with analog I/O routed to a MicroRTM per MTCA.4. Clock and trigger I/O are provided. The front panel also has the interface to the Display Port, single USB, RS-232 Ports as well as dual high-density connector for external I/O (total of 128 single ended or 64 differential).

The XCZU49DR includes a quad-core ARM Cortex-A53 application processing unit and dual-core Cortex-R5 real-time processing as well as over 4,200 DSP, 930 K logic cells and over 60 MB of internal memory (including 22.5 Mb of UltraRAM).

The onboard clock Jitter cleaner/PLL has an OCXO for stability and XO as the jitter reference.

The Module has on board 64 GB of Flash, 128 MB of boot flash and an SD Card as an option.

Key Features
  • Xilinx UltraScale+ RFSoC XCZU49DR FPGA
  • 16 ADC and 16 DAC to the rear
  • 8 GB of 64-bit wide DDR4 Memory (single bank) with ECC to CPU
  • 8 GB of 64-bit wide DDR4 Memory (single bank to Fabric)
  • MPSoC with block RAM and UltraRAM
  • SD Card (option)
  • 128 MB of boot Flash
  • 64 GB of user Flash
  • Double module, full-size, MTCA.4
Benefits
  • Zynq UltraScale+ MPSoC+ RF
  • Analog I/O routed via RTM to support additional signal conditioning
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related News
Related Products

AMC592

Kintex UltraScale FPGA Carrier for FMC, AMC

  • Single module, mid-size AMC (full-size optional)
  • AMC FPGA carrier for FMC per VITA 57
  • Xilinx UltraScale™ XCKU115 FPGA
  • Supported by DAQ Series™ data acquisition software
  • AMC Ports 12-15 and 17-20 are routed to the FPGA for direct FPGA to FPGA board communication
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 1/10/40GbE, etc. are FPGA programmable)
  • Two banks of 64-bit wide and a single bank of 32-bitwide DDR4 for a total of 20 GB
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
View product AMC592 Data Sheet

FMC214

70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • On-board clocking with multi-card synchronization capability
  • Low Pin Count (LPC) 160-pin connector
View product FMC214 Data Sheet

VT951

1U Rugged Chassis Platform with 6 AMC Slots, PCIe Gen 3 and Dual PSU

  • MicroTCA rugged 1U 19” rackmount chassis platform
  • Designed to meet MIL-STD-810F, MIL-STD-901D for shock/vibration
  • Compliant to MIL-STD-461E for EMI
  • Supports up to six single mid-size modules
  • Full Layer 2 or 3 managed Ethernet switch
  • Dual x4 or single x8 PCIe Gen 3 per AMC slot
  • Chassis accepts AMCs with single retention screw opposite of ejector handle on each slot
  • Management can run as Shelf/MCMC or MicroTCA Carrier Management Controller (MCMC)
  • Dual redundant PSUs located in the rear of the chassis
  • AMC.1, AMC.2, AMC.3 and AMC.4 compliant
  • Front to back airflow
View product VT951 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.