Description

The AMC903 outputs three sine wave clocks via SSMC connectors. The analog signals are attenuated, amplified, filtered and amplified again before being output via SSMC connectors. The attenuation is dynamic and user configurable by an on-board management processor, which is accessed through the backplane port 0 (GbE) or front panel RS-232 interface.

The Modules utilize Ultra Low Phase Noise OCXO with a noise floor as low as ‑178dBc/Hz. The module is designed for applications that demand extremely low noise sources, including the reference oscillator for phase-locked loop in microwave spectrum.

VadaTech can provide the LO with customer specific frequencies. The default configuration is 60.000000 MHz, 64.000000 MHz and 312.000000 MHz. Typical maximum output power is about 22 dBm per clock output.