Description

The VT888 is a 3U µTCA.4 chassis with 6 AMC double-width slots that can accept any AMC.1, AMC.2, AMC.3 and/or AMC.4. Four of the slots are to the uTCA.4 which allows for the Rear Transition Module (RTM).  The chassis has an option for JSM. Each slot can dissipate over 170W based with double tongue modules.

FRU Information and Carrier Locator

The VT888 has dual redundant FRU information and Carrier Locators. The Carrier Locator is assigned by easily accessible mechanical dip switches. The MCH reads the Locator via its private I2C bus.

100G/40GbE/PCIe Gen4 Backplane

The VT888 is based on the R3.0 of the uTCA which allows 100GbE or PCIe Gen4 capable backplane based on VadaTech design optimized for a better signal integrity. Each lane can operate at 25G.

Cooling and Temperature Sensors

The VT888 provides compact cooling configuration with a single intelligent Cooling Unit for a maximum density. The cooling airflow is front to back. There are multiple Temperature sensors in the chassis that monitor the intake and the outtake air temperature throughout the chassis. The sensors are monitored by the Management Controller over redundant IPMI bus. The Cooling Unit is located at the rear in a pull configuration. The fan and filter tray are removable, allowing easy maintenance of the system over time.

Scorpionware™ Software

VadaTech’s Scorpionware™ software can be used to access information about the current state of the Shelf or the Carrier, obtain information such as the FRU population, or monitor alarms, power management, current sensor values, and the overall health of the Shelf. The software GUI is very powerful, providing a Virtual Carrier and FRU construct for a simple, effective interface.