VadaTech, a leading manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, announces the VPX578. The VPX578 is a 6U VPX RFSoC FPGA based on Xilinx XCZU47DR MPSoC FPGA with front I/O access. The module has an on-board, reconfigurable FPGA which interfaces directly to the VPX P1-P2 with high speed SERDES. The SERDES on the board are configurable to run multiple protocols such as PCIe, Aurora, SRIO, XAUI, 40G, 100G, etc. For the PCIe option the module can be run as single x16/x8/x4, dual x4/x4 or dual x8/x8.
The CPU (Processing System “PS”) on the VPX578 has interface to a single bank of DDR4 memory channel (64-bit wide with ECC) with total capacity of 8 GB. The PL (Programmable Logic) interfaces to 8GB of DDR-4. This allows for large buffer sizes to be stored during processing as well as for queuing the data to the host. The module has onboard 64 GB of SATA NANDrive Flash, 128 MB of Boot Flash, and an SD Card option. The VPX578 has 8 ADC channels capable of sampling at 5GSPS and 8 DAC channels capable of sampling at 9.85 GSPS (the FPGA speed of -I2 ordering option can go up to 10GSPS).
Additionally, the VPX578 provides Display Port (DP), 32 General Purpose I/O, 20 LVDS, and four RS-485 through the front panel. The I/O is provided via a High-Density Connector (HDC). There are three RS-232 ports that are routed to a RS-232 to a USB device. The module also has a GbE to the front panel from the PS as well as an onboard microcontroller implements Tier-2 health management. Please consult with VadaTech Sales to discuss ordering options.