VadaTech, a leading manufacturer of integrated systems and embedded boards and chassis, enabling software and application ready platforms, announces VPX019.
The VPX019 is an Electronic Load module in a 6U VPX form factor and can draw power from +12V, +5V, +12_AUX, -12_AUX as well as the +3.3V_AUX. Module can load each of the input rails with 1W resolution per rail on +12V, +5V, +12V_AUX and -12V_AUX. The +3.3V_AUX has a resolution of 100mW. The maximum power draw on each rail is as follows: +12V 200W +5V 80W +12V_AUX 10W -12V_AUX 5W +3.3_AUX 3W The VPX019 has a GbE and an RS-232 for external interface. The module can simulate any dynamic load based on the user requirement on any of the rails. The GUI interface thru the GbE allows ease of operation as well as the user uploading of predefined dynamic load (Time vs. watts per voltage rail and/or Time vs. current per voltage rail). The VPX019 has an option to allow loop back on the high-speed TX/RX on the P1/P2/P3/P4/P5 and P6 connector for test and validation. The VPX019 P1/P2/P3/P4/P5 and P6 connectors utilizes high speed >25Gbaud rugged VPX connectors. The on-board CPU draws power from the +3.3V_AUX only. The VPX019 supports health management per VITA 46.11 Tier Two support.
- 6U VPX Electronic Load Module
- +12V up to 200W
- +5V up to 80W
- +12V_AUX up to 10W
- -12V_AUX up to 5W
- +3.3_AUX up to 3W
- GbE and RS-232 Interface for Monitoring and Configuration
- Graphical User Interface (GUI) thru GbE
- Option for loopback on high-speed TX/RX pairs
- P1/P2/P3/P4/P5 and P6 Connectors
- Available in Conduction Cooled
- Health Management
Please contact VadaTech’s sales team to discuss ordering options, system integration and technical support.