VadaTech Announces FMC272, mixed signal front end with Quad RF DAC and Dual RF ADC (AD9082)
VadaTech, a leading manufacturer of integrated systems and embedded boards and chassis, enabling software and application ready platforms, announces FMC272.
The FMC272 is an FMC per VITA 57.1 specification. The FMC272 has a single AD9082 Device from Analog Devices which provides Quad DAC at 12 GSPS/16-bit and Dual ADC at 6 GSPS/12-bit. The ADC has 8GHz Analog Input full power bandwidth (-3db). The DAC has a useable Analog bandwidth of 8GHz. The module has a clock input via front panel which allows synchronization to an external clock. The FMC272 allows the synchronization clock to also come from the carrier. The FMC272 interfaces via 8 lanes of JESD204B/JESD204C to the host carrier (note for max performance JESD204C with speed of 24.75Gbps is utilized). The module has a direct RF sampling clock option up to 12GHz clock input. The module has 10 SSMC Connectors for its ADC/DAC and a clock input.
- Based on Analog Device AD9082
- Quad RF DAC at 12 GSPS 16-bit
- Direct Digital Synthesis (DDS)
- Usable analog bandwidth 8GHz
- Dual RF ADC at 6 GSPS 12-bit
- Usable analog bandwidth 8GHz
- Option for Direct RF sampling clock input up to 12GHz
- 8 lanes of JESD204B/JESD204C interface to the host carrier (note for max performance JESD204C with speed of 24.75Gbps is utilized)
- FPGA Mezzanine Card (FMC) per VITA 57.1
- Clock input for synchronization via front or rear
Please contact VadaTech’s sales team to discuss ordering options, system integration and technical support.
VadaTech Announces PCI593, PCIe VU13P UltraScale+ FPGA with Quad QSFP-DD
VadaTech, a leading manufacturer of integrated systems and embedded boards and chassis, enabling software and application ready platforms, announces PCI593.
The PCI593 is based on the Xilinx VU13P UltraScale+TM FPGA, which provides over 12,000 DSP slices, 360 Mb of UltraRAM and 3,780K logic cells. The FPGA interfaces to the quad QSFP-DD modules. It also has interface to a Dual DDR4 DIMM memory socket that is 64-bit wide with16 GB total per DIMM (total of 32GB). This allows for large buffer sizes to be stored during processing as well as for queuing the data to the host. PCI593 has a PLL that can lock into an external clock such as 1PPS or to a sinewave clock up to 400MHz. The module also has a GbE with SyncE capabilities. The PCI593 could run as SyncE Master and/or Slave. The module provides four clock output which could be connected to adjacent PCI593 modules to allow synchronized between modules. PCI593 has x16 PCIe edge connector routed to the FPGA PCIe hard IP block. The x16 SERDES going to the edge connector could be configured to run any protocol and integrated, for example, into VadaTech’s VT808 chassis. In addition, there are 16 uncommitted SERDES routed to a dual x8 expansion connector, providing direct connectivity to a neighboring FPGA (e.g. via Aurora, 10/40GbE, SRIO, PCIe) without the need to go through the host. The Quad QSFP-DD Cages could take 100GbE as well as 40GbE optical transceiver. The optical modules could be bifurcated to Quad 1/10/25GbE lanes for a total of 32 ports. The optical modules are protocol agnostic and could take a mix of 100G and/or 40G transceiver. Active cooling of the module and option with passive cooling. The passive cooling requires a chassis that forces air over the PCI593 heat sink, such as VadaTech’s VT808 chassis.
- PCIe x16 or any protocol on the x16 SERDES
- Xilinx UltraScale+™ VU13P FPGA
- Quad QSFP-DD ports and an additional GbE
- SyncE Master/Slave
- PLL to lock to an external 1PPS or an external sinewave clock up to 400Mhz
- Dual x8 SERDES lanes for direct connection to neighboring FPGA card(s)
- Dual bank of DIMM Memory for total of 32GB (16G per DIMM)
- Active cooling or passive cooling (utilizing chassis cooling such as VadaTech VT808 chassis)
Please contact VadaTech’s sales team to discuss ordering options, system integration and technical support.
VadaTech Announces VPX241, 3U VPX Ethernet Media Converter from 1000BASE-T/10GBASE-T to 1G/10G
VadaTech, a leading manufacturer of integrated systems and embedded boards and chassis, enabling software and application ready platforms, announces VPX241.
The VPX241 is a 3U VPX module per VITA 46. The modules bring four 1G/10G from the P1 connector to four 1000BASE-T/10GBASE-T ports on P2.
- 3U VPX form factor Media Converter for 1G/10G Ethernet
- x4 1G/10G to 1000BASE-T/10GBASE-T
- Health Management through dedicated Processor
Please contact VadaTech’s sales team to discuss ordering options, system integration and technical support.
VadaTech Announces VRT028A, a rear transition I/O module VPX028 Power Module
VadaTech, a leading manufacturer of integrated systems and embedded boards and chassis, enabling software and application ready platforms, announces VRT028A.
The VRT028A is a 6U VPX Rear Transition Module for use with VadaTech VPX028 Power Entry Module. The module has a blind mate connector that connects the AC power from an IEC connector to the backplane.
- 6U RTM VITA 46
- Interfaces with the VadaTech VPX028 Power Entry Module
Please contact VadaTech’s sales team to discuss ordering options, system integration and technical support.
VadaTech Announces FMC240, a High-Speed Quad ADC 16-bit @ 250MSPS, DAC 14-bit @ 5.7GSPS
VadaTech, a leading manufacturer of integrated systems and embedded boards and chassis, enabling software and application ready platforms, announces FMC240.
The FMC240 is an FPGA Mezzanine Card per VITA 57 specification with a high-speed quad ADC and a single DAC. The ADC converter utilizes the two TI part number ADS42JB69 (JESD204B) dual channel 16-bit @ 250 MSPS and the DAC is based on Analog Devices part number AD9129 14-bit @ 5.7 GSPS. The module has a wide-band PLL which can take its reference clock via the front panel, FMC Carrier or the on-board reference. The FMC240 is a copy of the FMC213 with the exception of the VADJ being able to go down to +1.2V. The PLL on the FMC240 has also been upgraded
- FPGA Mezzanine Card (FMC) per VITA 57
- Quad ADC based on ADS42JB69:
- JESD204B compliant
- Analog Front end bandwidth 900MHz
- 16-Bit Resolution @ 250 MSPS
- DAC based on AD9129:
- Single DAC 14-bit @ 5.7 GSPS
- Direct RF Synthesis @ 2.8 GSPS Data Rate
- RF front panel reference clock input
- Trig In/Out
- RoHS compliant
- The FMC240 is a copy of the FMC213 with the VADJ going down to +1.2V as well as the PLL upgrade
Please contact VadaTech’s sales team to discuss ordering options, system integration and technical support.
VadaTech Announces VTX354, 12 slot chassis for 3U VPX modules with dual power slots
VadaTech, a leading manufacturer of integrated systems and embedded boards and chassis, enabling software and application ready platforms, announces VTX354.
The Chassis provides twelve 5HP (1” pitch) 3U VPX payload slots, fully compliant to VITA 46.0 baseline specification and VITA 65 with the support for the Rear Transition Module (RTM). The VTX354 has a 3.14U (5.5”) rack height. The chassis can accept 0.8-inch, 0.85-inch and 1.0-inch pitch modules. The backplane utilized the high speed rugged VPX connector that can do speed of over 25G. The chassis provides two slots for the VPX Power Modules per VITA 62 specification. The Power supply slots are 10HP (2” Pitch). The VTX354 does not have any fan tray.
- 19” Rack mountable with 3.14U (5.5”) rack height
- Twelve 3U VPX slots
- Dual VPX 3U Power Supplies per VITA 62
- VITA 65.0 and VIA46.0 compliant
- Utilizing the high speed VPX rugged connectors >25G
Please contact VadaTech’s sales team to discuss ordering options, system integration and technical support.
VadaTech Announces VTX355, 12 Slot Chassis for 3U VPX Modules with Dual Power Module Slots
VadaTech, a leading manufacturer of integrated systems and embedded boards and chassis, enabling software and application ready platforms, announces VTX355.
The Chassis provides twelve 5HP (1” pitch) 3U VPX payload slots, fully compliant to VITA 46.0 baseline specification and VITA 65 with the support for the Rear Transition Module (RTM). The VTX355 has a 4U rack height. The chassis can accept 0.8-inch, 0.85-inch and 1.0-inch pitch modules. The backplane utilized the high speed rugged VPX connector that can do speed of over 25G. The chassis provides two slots for the VPX Power Modules per VITA 62 specification. The Power supply slots are 10HP (2” Pitch). The VTX355 has removable fan tray for the front and the rear modules.
- 19” Rack mountable with 4U rack height
- Twelve 3U VPX slots
- Dual VPX 3U Power Supplies per VITA 62
- VITA 65.0 and VIA46.0 compliant
- Utilizing the high speed VPX rugged connectors >25G
Please contact VadaTech’s sales team to discuss ordering options, system integration and technical support.