VadaTech, a leading manufacturer of integrated systems and embedded boards and chassis, enabling software and application ready platforms, announces VPX400.
The VPX400 is a 3U VPX FPGA Carrier with single FMC+ (VITA 57.4) interface. The unit has an onboard, re-configurable FPGA which interfaces directly to the VPX P1/P2 connector and all FMC+ LA/HA/HB pairs (the module does not support HSPCe connector and has only 16 SERDES routed to the FMC+). The FPGA interfaces to two DDR4 memory blocks (8GB of 64-bit wide with ECC to the Processor Subsystem and 8GB of 64-bit wide to the Fabric). This allows for large buffer sizes to be stored during processing as well as for queuing the data to the host. The VPX400 is based on AMD Versal Prime XCVM1802 MPSoC FPGA. The FPGA has 1968 DSP Slices and 1968k logic cells. The XCVM1802 includes Dual-core ARM application processor, dual-core ARM Cortex-R5F. The module has x8 SerDes routed to the P1 which could run any protocol such as PCIe, SRIO, Ethernet, Aurora, etc. The module has dual GbE that could run as 1000Base-T to the P2 or as 1000Base-X to the P1 (ports 15/16). The module has onboard 64 GB of Flash, 128 MB of boot flash and an SD Card as an option.
- 3U VPX form factor
- AMD Versal Prime XCVM1802 FPGA
- Single FMC+ (VITA 57.4) site
- 8 GB of 64-bit wide DDR4 Memory Single Bank with ECC to the CPU
- 8 GB of 64-bit wide DDR4 Memory Single Bank to the Fabric
- Integrated 34Mb block RAM and 130Mb UltraRAM
- Health Management through dedicated Processor
Please contact VadaTech’s sales team to discuss ordering options, system integration and technical support.