DC Power Module, 241W or 460W

  • Single module, full-size per AMC.0
  • 10 to 36 VDC input for 241W option and 18 to 36 VDC input for 460W option
  • Support for power module redundancy
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Field upgradable
  • IPMI 2.0 compliant
  • HPM.1 compliant
  • Without the presence of an MCH the modules can be turned on
  • Menu driven software for ease of configuration
  • Current measure for each module
  • External as well as internal WDT

Download Datasheet Add to Info Request

add to compare
0

The VadaTech UTC014 is a 241/460W power module for use in a μTCA chassis. The power module runs at 84% efficiency when running at maximum load. This results in 200/400W (available to the system). It is fully compliant with the MicroTCA.0 and MicroTCA.1 specifications; including dual-redundant I2C buses (IPMB-0).

The UTC014 is fully redundant when used in conjunction with a second instance of the module. It provides power to the twelve slots, two MCHs (MicroTCA Carrier Hubs) as well as the CUs.

Multiple temperature sensors are included on-board to monitor for over-temp conditions within the module. The current is continuously measured for each of the modules and reported to MCH for any fault.

The firmware is upgradable via HPM.

Key Features
  • Single module, full-size per AMC.0
  • 10 to 36 VDC input for 241W option and 18 to 36 VDC input for 460W option
  • Support for power module redundancy
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Field upgradable
  • IPMI 2.0 compliant
  • HPM.1 compliant
  • Without the presence of an MCH the modules can be turned on
  • Menu driven software for ease of configuration
  • Current measure for each module
  • External as well as internal WDT
Benefits
  • Very low ripple voltage
  • Support for power module redundancy
  • Efficient re-use of existing designs/components reduce costs
  • Electrical, mechanical, software and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, speciality modules, and test/dev product from one source
Specifications
Specifications

Block diagram

Related Products

AMC720

Xeon E3-1125 Processor AMC, PCIe

  • Intel® Xeon™ E3 processor
  • Conduction cooled version available
  • Single module, mid-size per AMC.0
  • PCIe Gen2
    • Gen3 on v2 option
    • x4 on ports 4-7 and 8-11 or single PCIe x8 on ports 4-11 (AMC.1)
  • GbE to port 0 and 1 (AMC.2) and SATA to port 2 and 3 (AMC.3)
  • Dual GbE to the front panel
  • Up to 16 GB of DDR3 w/ ECC and 32 GB Flash
  • Option for 32 GB SATA drive
  • Serial over LAN
  • IPMI 2.0 compliant
View product AMC720 Data Sheet

UTC004

3rd Gen MicroTCA Carrier Hub (MCH), 40GbE/PCIe Gen 3

  • Unified 1 GHz quad-core CPU for MCMC (MicroTCA Carrier Management Controller), Shelf Manager, Clocking, and Fabric management
  • Automatic fail-over with redundant UTC004s
  • 1GbE base switch with dual 100/1000/10G uplink
  • Full Layer 2 or 3 managed Ethernet switches
  • Non-blocking PCIe Gen 3, SRIO Gen 2, 10GbE/40GbE, or Crossbar Switch option to AMC fat pipes with options for up to 40GbE uplink
  • Low-jitter M-LVDS clock distribution crossbar matrix
  • PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588
  • Single module, full size per AMC.0
View product UTC004 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.