Chassis Manager with JTAG Switch Module (JSM), 6U VPX

  • Quad ARM Cortex-A53 @ 1.6 GHz per core
  • 4GB LP-DDR4 memory
  • FRAM for log messages
  • 64 NAND Flash
  • JSM with 18 JTAG Ports
  • I2C Real Time Clock with battery backup
  • Low power (4W)
  • Based on VadaTech VT040 Module
  • IPMI 2.0 compliant

Download Datasheet Add to Info Request

add to compare

The VadaTech VPX985 Chassis Manager is based on the VITA 46.11 specification. The VITA 46.11 leverages the Intelligent Platform Management Interface (IPMI) and AdvancedTCA Specification by PICMG as its architectural foundation. The VPX985 is based on VadaTech VT040 Module VT040 - Shelf Manager, 4th Generation ATCA, MTCA and VPX platforms (vadatech.com).

The VadaTech Chassis Management solution is derived from our field proven VadaTech ATCA Shelf Manager utilizing core interfaces such as the Simple Network Management Protocol (SNMP), Remote Management Control Protocol (RMCP), Web Interface, System Management application (Scorpionware™), and a user-friendly Command Line Interface.

VadaTech VPX IPMC and Chassis Management solutions support VITA 46.11 Tier-2 command set, providing a higher level of functionality in the management layer and chassis cooling capabilities. Additionally, VadaTech VPX management solutions have taken advantage of the HPM.1 PICMG Specification providing a framework for upgrading the IPMC firmware.

The Module has GbE as SFP connecting to the Shelf Manager. It also has dual GbE to P1 as 1000Base-BX (SERDES Based).

The module also has an option for JTAG Switch Module (JSM) and optional Virtual Probe, easing device access within the chassis for FPGA code developers. The JTAG Ports from each VPX module are routed to the P3/P4 for a total of 18 modules. This allows max flexibility within the chassis.  The optional Virtual JTAG feature is available via either of the GbE Ports (front or rear). 

The JSM can also be used as a standalone module via the front panel connector, so multiple JTAG dongles are not needed within the chassis.

Key Features
  • Quad ARM Cortex-A53 @ 1.6 GHz per core
  • 4GB LP-DDR4 memory
  • FRAM for log messages
  • 64 NAND Flash
  • JSM with 18 JTAG Ports
  • I2C Real Time Clock with battery backup
  • Low power (4W)
  • Based on VadaTech VT040 Module
  • IPMI 2.0 compliant
Benefits
  • Supports VITA 46.11 Tier-2 command set
  • Utilizing VadaTech VT003 third generation Shelf
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

VPX551

Dual Kintex UltraScale™, 6U VPX

  • Dual Kintex UltraScale™ XCKU115
  • 16 GB of 64-bit wide DDR4 Memory to each FPGA
  • Rear fibre I/O via VITA 66.5
  • Front fibre via SFP+
  • Health Management through dedicated Processor
View product VPX551 Data Sheet

VPX645

NVMe HBA with RAID (0, 1, 5, 6, 10, 50 and 60), 3U VPX

  • 3U VPX NVMe Host Bus Adapter with Full support for RAID
  • Dual Core ARM A15 RAID On Chip (ROC)
  • Onboard 8 GB of DDR4 Memory with ECC
  • Hardware Engine for RAID 5 and RAID 6 acceleration
  • PCIe Gen3 x8 or x4
  • Health Management through dedicated Processor
View product VPX645 Data Sheet

VPX752

Intel® Xeon™ SoC, PCIe Gen3 and 10GbE (XAUI), 6U VPX

  • 6U VPX module Intel 5th Generation Xeon-D SoC
  • PCIe Gen3 x16 (dual x8 or quad x4)
  • Quad 10GbE XAUI
  • Front-panel video out via DP with dual USB3.0
  • Dual front panel 100/1000/10G Ports
  • Single XMC site with I/O expansion going to P5/P6
  • Dual isolated RS-422/485 and a single RS-232 port
  • Health Management through dedicated Processor
View product VPX752 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.