Low Cost 26 Port ATCA Switch
- AdvancedTCA open standard form factor
- PICMG 3.1 compliant
- Managed Layer 2 switch
- GbE to Base Interface for 15 Node slots
- One port to the update channel
- Eight front panel SFP connectors for mix of Copper and Fiber interfaces
- Support up to 8K MAC address
- 4K IEEE 802.1Q VLANs
- VLAN-based packet filtering
- Packet classification using IEEE802.1p QoS
- 9K Jumbo frames
- Spanning tree, Mirroring, QoS
- SNMP and RMON
- OS support for:
Download Datasheet Add to Info Request
add to compare
The ATC808 is a low cost AdvancedTCA 26 port Gigabit Ethernet switch that serves a number of egress ports with support for a rich set of Layer 2 managed software. The Management is done via http.
The module provides eight GbE ports in the front via SFP. This allows a mix of Fiber and Copper transceivers. In addition it has 15 ports routed to the Base Channel, two ports to the shelf manager and one port to the update channel.
The IPMI management is utilizing VadaTech’s second generation IPMI management controller.
Key Features
- AdvancedTCA open standard form factor
- PICMG 3.1 compliant
- Managed Layer 2 switch
- GbE to Base Interface for 15 Node slots
- One port to the update channel
- Eight front panel SFP connectors for mix of Copper and Fiber interfaces
- Support up to 8K MAC address
- 4K IEEE 802.1Q VLANs
- VLAN-based packet filtering
- Packet classification using IEEE802.1p QoS
- 9K Jumbo frames
- Spanning tree, Mirroring, QoS
- SNMP and RMON
- OS support for:
Benefits
- Design utilizes proven VadaTech subcomponents and engineering techniques
- Electrical, mechanical, software, and system-level
expertise in house
- Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related News
VIDEO
Learn about VadaTech supported tools available for open standard embedded systems. Be sure to watch Part 2. view video...
VIDEO
Learn about VadaTech supported tools available for open standard embedded systems.Be sure to also view Part 1. view video...
ATC800
48-Port GbE with 10-GbE Uplink Switch
- AdvancedTCA open standard form factor
- Linux operating system
- Open Architect™ firmware
- Run as the Shelf Manager or Node board
- Five front panel 10/100/1000Base-T ports
- Nine front panel SFP ports
- Front panel XFP egress port for 10GbE
- GbE to Base Interface for 14 payload slots and Shelf Manager
- Eighteen GbE ports to Zone 3 for use with an RTM
- 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
- PICMG 3.1 compliant
- IEEE 802.3 compliant
- IPMI Version 2.0 compliant
View product
ATC800 Data Sheet
VT000
ATCA Power Module
- Powers a single ATCA module
- IPMI hardware address and parity
- Fuse on each of the power rails
- Enable switch
- Connector for IPMI Bus A and B
- Allows connection to shelf managers (such as VadaTech’s bench-top style VT007)
- Test points
- RoHS compliant
View product
VT000 Data Sheet
VT830
6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers
- 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
- 10GbE/GbE Managed Layer 2
- 40GbE/10GbE/GbE Managed Layer 3
- 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
- Split power distribution (odd slots on A1/B1,even slots on A2/B2)
- Redundant Power supplies AC (DC or AC/DC optional)
- Up to four AC supply at 1300W each (N+1)
- 6 Rear Transition Module (RTM) slots
View product
VT830 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
