Complete VPX Timing Module with IRIG-B, GPS, 1PPS, IEEE1588, SyncE

  • 3U VPX timing module
  • Single-module complete timing card supporting grandmaster clock / slave clock modes
  • GPS receiver on board
  • Sine Wave clock input (typically 10MHz)
  • 1PPS/IRIG-B DCLS/Manchester input
  • Clock/IRIG-B DCLS/Manchester output
  • IRIG-B Amplitude Modulated (AM) input
  • IRIG-B Amplitude Modulated (AM) output
  • Synchronous Ethernet (SyncE) Master/Slave
  • IEEE1588 PTP Master/Slave via 10/100/1000Base-T
  • NMEA standard serial output from GPS
  • 5x DPLL on board for precise timekeeping
  • RoHS compliant
  • Clocks to P0 as MLVDS

Download Datasheet Add to Info Request

add to compare

The VPX336 is a 3U VPX module providing a complete timing solution. The VPX336 has 1PPS, Sine Wave clock, IRIG-B input, IRIG-B out and a GbE.

The module can take its upstream time/frequency from one of:

  • GPS (freq and time + location/velocity/other metadata)
  • IEEE1588 PTP (freq and time)
  • IRIG-B AM/DCLS/Manchester (freq and time)
  • 1PPS (freq only)
  • Sine Wave Clock In (freq only)
  • Synchronous Ethernet (freq only, can be combined with IEEE1588 PTP)

The module can provide its downstream time/frequency to all of:

  • IEEE1588 PTP (freq and time)
  • IRIG-B AM/DCLS/Manchester (freq and time)
  • 1PPS (freq only, can be combined with NMEA for freq and time)
  • NMEA (time only, can be combined with 1PPS for freq and time)
  • Clock Out (freq only)
  • Synchronous Ethernet (freq only)

The module has an on board 5 x DPLL. The DPLL synchronizes 1Hz to 750MHz, providing frequency with jitter cleaning of noisy references. Complies with ITU-T G.8286, G.813, G. 812 and Telcordia GR-253/GR-1244. The module will automatically holdover upon loss of reference while still providing its time/frequency outputs to the rest of the system.  The DPLL allows for fast lock to 1HZ input taking only 3 to 60 seconds depending on the reference input compared to 10 minutes or more for previous solutions.

The VPX336 has RS-232 routed to the front as well as to the rear (P2 connector). The rear RS-232 has an option to be level shifted or simply as LVCMOS.

The VPX336 provides standard NMEA format via RS-232 for external devices.

Key Features
  • 3U VPX timing module
  • Single-module complete timing card supporting grandmaster clock / slave clock modes
  • GPS receiver on board
  • Sine Wave clock input (typically 10MHz)
  • 1PPS/IRIG-B DCLS/Manchester input
  • Clock/IRIG-B DCLS/Manchester output
  • IRIG-B Amplitude Modulated (AM) input
  • IRIG-B Amplitude Modulated (AM) output
  • Synchronous Ethernet (SyncE) Master/Slave
  • IEEE1588 PTP Master/Slave via 10/100/1000Base-T
  • NMEA standard serial output from GPS
  • 5x DPLL on board for precise timekeeping
  • RoHS compliant
  • Clocks to P0 as MLVDS
Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related News
Related Products

AMC585

Zynq UltraScale+ FPGA, FMC+ Carrier, AMC

  • Xilinx UltraScale+ XCZU19EG FPGA
  • Single FMC+ (VITA 57.4) site
  • 8 GB of 64-bit wide DDR4 Memory (single bank) with ECC (CPU)
  • 8 GB of 64-bit wide DDR4 Memory (single bank, FPGA)
  • MPSoC with block RAM and UltraRAM
  • SD Card (option)
  • 128 MB of boot Flash
  • 64 GB of user Flash
View product AMC585 Data Sheet

FMC214

70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • On-board clocking with multi-card synchronization capability
  • Low Pin Count (LPC) 160-pin connector
View product FMC214 Data Sheet

VPX592

FPGA/FMC Carrier, Kintex UltraScaleā„¢, 3U VPX

  • 3U FPGA carrier for FPGA Mezzanine Card (FMC) per VITA 46 and VITA 57
  • Xilinx Kintex UltraScale™  XCKU115 FPGA
  • High-performance clock jitter cleaner
  • VHDL reference design with source code
  • Protocols such as PCIe, SRIO, 10GbE/40GbE, etc. are FPGA programmable
  • Compatible with VadaTech and 3rd party FMCs
  • 20 GB of DDR4 Memory (2 banks of 64-bit wide, and single bank of 32-bit wide)
  • Health Management through dedicated Processor
View product VPX592 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.